Box defekt ??

Hard- und Software Fragen rund um die dbox2 - außer zu, JtG-Team-Image
Antworten
Nachricht
Autor
arnie59
Einmal-Streamer
Einmal-Streamer
Beiträge: 3
Registriert: Mi 21 Apr 2004, 19:16

Box defekt ??

#1 Beitrag von arnie59 » So 20 Nov 2005, 20:31

Hallo zusammen,
habe seit ein paar Tagen das Problem, dass meine Box nicht mehr per Netzwerk (FTP, ping, Xmedia Grabber) erreichbar ist :? Letzte funktionierende Aufnahme war am letzten Sonntag, den 13.11. Danach wurde am Image v. 16.10. nichts verändert. Auch die Netzwerkeinträge sind alle noch so, wie sie sein sollen. Ebenso fällt auf, dass die Schrift in den Menüeinträgen immer wieder leicht zittert, was vorher ebenso nicht der Fall war.
Habe schon Kabel, Switch und PC gewechselt, hilft aber alles nichts.
Weiss jemand Rat?

Gruß Arnold

Benutzeravatar
jmittelst
Co-Admin
Co-Admin
Beiträge: 11013
Registriert: So 16 Nov 2003, 13:42
Wohnort: Schildgen (Bergisch Gladbach)
Kontaktdaten:

#2 Beitrag von jmittelst » So 20 Nov 2005, 20:49

VU+ Ultimo 4k
VU+ Duo²
VU+ Solo²


[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!

arnie59
Einmal-Streamer
Einmal-Streamer
Beiträge: 3
Registriert: Mi 21 Apr 2004, 19:16

#3 Beitrag von arnie59 » So 20 Nov 2005, 22:45

Hallo Jens,
danke für deine Antwort.
Könntest du Dir bitte mal das Log ansehen?

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID 
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 158892
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Mar 15 2005 - 12:31:02)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 643654 bytes loaded to 0x100000
......................................................................
Un-Protected 70 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    643590 Bytes = 628.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.31-dbox2 (vom Jtg-Team)  (gcc version 3.3.5) #1 Mon Jun 13 10:
22:45 CEST 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=cramfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30840k available (1096k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2d:9c:be
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (Cramfs)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started:  BusyBox v1.01 (2005.08.29-20:54+0000) multi-call bUsing /lib/modu
les/2.4.31-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan  1 12:00:00 CET 1970
Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.31-dbox2/misc/avs.o
Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
Using /lib/modules/2.4.31-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.31-dbox2/avia_av_core: Starting avia_gt_wdt thread.
misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/tda8044h.o
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
$Id: sectionsd.cpp,v 1.193 2005/10/02 21:27:58 mogway Exp $
caching 504 hours
events are old 180min after their end time
$Id: zapit.cpp,v 1.375 2005/10/01 00:05:14 racker Exp $
[camd] ca system id: 1702
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (2, Philips D-BOX2)
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...jtginfo $Id: jtginfo.c,v 1.
2 2004/10/31 17:51:40 jtgriker Exp $
OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
[CFSMounter] Mount(0) 192.168.100.1:/movie -> /mnt/filme
[CFSMounter] FS mount error: "mount -t nfs 192.168.100.1:/movie /mnt/filme -o ro
,soft,udp,nolock,rsize=8192,wsize=8192"
[CFSMounter] Mount(0) 192.168.100.1:/mp3 -> /mnt/mp3
mount: RPC: Unable to receive; errno = No route to host
mount: nfsmount failed: Bad file descriptor
nfs warning: mount version newer than kernel
RPC: sendmsg returned error 22
nfs: RPC call returned error 22
nfs_get_root: getattr error = 22
nfs_read_super: get root inode failed
mount: Mounting 192.168.100.1:/movie on /mnt/filme failed: Invalid argument
[CFSMounter] FS mount error: "mount -t nfs 192.168.100.1:/mp3 /mnt/mp3 -o ro,sof
t,udp,nolock,rsize=8192,wsize=8192"
[CFSMounter] Mount(0) 192.168.100.1:/Bilder -> /mnt/bilder
mount: RPC: Unable to receive; errno = No route to host
mount: nfsmount failed: Bad file descriptor
nfs warning: mount version newer than kernel
RPC: sendmsg returned error 22
nfs: RPC call returned error 22
nfs_get_root: getattr error = 22
nfs_read_super: get root inode failed
mount: Mounting 192.168.100.1:/mp3 on /mnt/mp3 failed: Invalid argument
[sectionsd] getUTC: read: Connection timed out
[CFSMounter] FS mount error: "mount -t nfs 192.168.100.1:/Bilder /mnt/bilder -o 
ro,soft,udp,nolock,rsize=8192,wsize=8192"
[neutrino] menue setup
loading locales: scandir: No such file or directory
mount: RPC: Unable to receive; errno = No route to host
mount: nfsmount failed: Bad file descriptor
nfs warning: mount version newer than kernel
[neutrino] received 17 sats
[neutrino] registering as event RPC: sendmsg returned error 22
nfs: RPC call returned error 22
nfs_get_root: getattr error = 22
nfs_read_super: get root inode failed
client
mount: Mounting 192.168.100.1:/Bilder on /mnt/bilder failed: Invalid argument
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
zap failed!

Danke.

Gruß Arnold

Benutzeravatar
jmittelst
Co-Admin
Co-Admin
Beiträge: 11013
Registriert: So 16 Nov 2003, 13:42
Wohnort: Schildgen (Bergisch Gladbach)
Kontaktdaten:

#4 Beitrag von jmittelst » Mo 21 Nov 2005, 5:58

Hmmm - Ausser, das er nicht mounten kann, sehe ich da jetzt auf den 1. Blick nix unauffälligees.

Mach mal eine Dos-Box auf (Start-Ausführen-cmd) und gib "ipconfig /all" ein und poste. was dabei rauskommt.

Ist die Box per Crossover an eine 2. Netzwerkkarte oder an einen Switch/Hub angeschlossen? Leuchten an der Netzwerkkarte oder am Switch/Hub die Verbindungs-LEDs, wenn die Box an ist? Sitzen alle Kabel fest?

Neue Firewall (auch Update) installiert? Oder eine Änderung im Netzwerk?

cu
Jens
VU+ Ultimo 4k
VU+ Duo²
VU+ Solo²


[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!

arnie59
Einmal-Streamer
Einmal-Streamer
Beiträge: 3
Registriert: Mi 21 Apr 2004, 19:16

#5 Beitrag von arnie59 » Mo 21 Nov 2005, 21:00

Hallo Jens,
Problem gelöst :D

Dein Hinweis mit dem Crossover-Kabel hat mich auf die Spur gebracht.
Grund für das Problem war letztlich, dass ein fest verlegtes Netzwerk-Kabel und genau der Port an meinem 8er-Switch, an dem die Box hängt, wohl einen Defekt hat. (Vielleicht hat's eine Maus angefressen :wink: )
Mein Fehler war, dass ich immer nur eine einzelne Komponente zum testen ausgewechselt habe.
Ich danke Dir trotzdem für deine Mühe.

Gruß Arnold

KeXXeN
Moderator
Moderator
Beiträge: 2975
Registriert: Di 21 Okt 2003, 16:16
Wohnort: Hamburg
Kontaktdaten:

#6 Beitrag von KeXXeN » Mo 21 Nov 2005, 21:43

Möglicherweise, sowas solls ja bei einigen Switchs geben, wars ja ein spezieller Port der z. B. nur für Uplink geeignet ist.
Meist wird dafür Port 1 oder Port 8 genutzt.

Benutzeravatar
jmittelst
Co-Admin
Co-Admin
Beiträge: 11013
Registriert: So 16 Nov 2003, 13:42
Wohnort: Schildgen (Bergisch Gladbach)
Kontaktdaten:

#7 Beitrag von jmittelst » Di 22 Nov 2005, 5:51

@arnie59: Kein Grund zu danken. An die einfachsten Sachen denkt man immer zuletzt. Hatte neulich auch einen Internet-Ausfall, den ich mir nicht erklären konnte. Irgenwann hab ich dann festgestellt, das das Netzwerkkabel zwischen Router und Modem leicht rausgerutscht war.

cu
Jens
VU+ Ultimo 4k
VU+ Duo²
VU+ Solo²


[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!

Antworten