Kein Empfang nach Movieplayerbetrieb

[svenschmi]

Hallo Zusammen,

also ich komme hier nicht mehr weiter.
Habe das 2.3.4 drauf und immer wenn ich den Movieplayer beende, habe ich keinen TV-Empfang mehr.
Ich habe schon mal eine andere Festplatte drangehängt, da ich dachte die hat vielleicht eine Macke, aber ohne Erfolg.
Es langt den Movieplayer aufzurufen und wieder zu verlassen und schon habe ich kein TV-Signal mehr. Nach einem Neustart der Box geht es wieder (aber erst seit der neuen Platte, vorher musste ich den IDE-Treiber deaktivieren, neu booten und dann wieder aktivieren).
Kennt das Problem jemand? Der jetzige Zustand ist echt nervig, will meine aufnahmen schon gar nicht mehr ansehen.

Ich hoffe auf Hilfe.

Gruß
Sven

[svenschmi]

Also, mittlerweile ist es doch wieder so, dass ich nach dem Abspielen einer Aufnahme über den Movieplayer keinen Empfang habe und auch nach dem Neustart der Box keinen Empfang mehr bekomme.
Erst wenn ich den IDE-Treiber deaktiviere und neu starte, bzw. sogar mehrmals neu starte geht der Empfang wieder. Danach aktiviere ich den IDE-Treiber wieder und boote neu, dann läuft wieder alles bis zum nächsten Movieplayereinsatz.

Ich schreibe jetzt ein Bootlog mit und stelle es gleich ein.

Sven

[svenschmi]

So, folgendes Szenario in Protokollform:

Sender RTL eingeschaltet, alles normal.
Movieplayer aufgerufen, Film abgespielt (nein, es war nicht Gute Zeiten Schlechte Zeiten sondern CSI Miami )
Nach 4 Minuten beendet, RTL hakt.
Erneut abgespielt, nach ca. 5-10Minuten beendet, RTL-Empfang nur gekrache, RTL2 genauso. Viele andere Sender gingen.
Mittlerweile geht gar kein Sender mehr, muss wahrscheinlich neu flashen......
Hoffentlich kann jemand helfen...?!?!?



dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 170380
verify sig: 262
Branching to 0x40000


U-Boot 2009.08 (Tuxbox) (04.12.09 09:04:31)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 671124 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.7-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 671060 Bytes = 655.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.7-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #1 Fr 4. Dez 08:
42:33 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:31:7f:0d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.15.2 (2009-12-04 09:15:43 CET)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: IDE-Interface detected, Vendor: Gurgel
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
dboxide: $Id: main.c,v 1.14 2009/06/19 14:39:26 seife Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc394f000
dboxide: IDE-Interface detected, Vendor: Gurgel
dboxide: sreset succeeded
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Probing IDE interface ide0...
hda: WDC WD1600BB-56GUA2, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 312581808 sectors (160042 MB) w/2048KiB Cache, CHS=19457/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
Adding Swap: 136544k swap-space (priority -1)
avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

/dev/ide/host0/bus0/target0/lun0/disc:
setting 32-bit IO_support flag to 1
setting drive write-caching to 0 (off)avia_av_event: $Id: avia_av_event.c,v 1.1
1 2003/10/26 16:32:51 obi Exp $

setting standby to 60 (5 minutes)
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
IO_support = 1 (32-bit)
write-caching = 0 (off)
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1993
DVB: registering frontend 0:0 (VES1993)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Fri Dec 13 21:45:52 CET 1901
$Id: sectionsd.cpp,v 1.315 2009/11/30 21:50:26 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 1 onid 85
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[camd] ca system id: 1702
[CVideo::setVideoFormat] output format: 4:3(LB)
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=150 period=150 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 31 sats
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[zapit] tuned frequency does not match request. difference: 214
PES, queue 0 normal.
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[sectionsd] getUTC: read: Connection timed out
[yhttpd] Webserver starting...
21:46:36.581 [timeThread] - 03.04.2010 11:24:37, tim: Sat Apr 3 11:24:37 2010
[neutrino] timeset event. difference is -877197015 s, stepping...
21:46:36.636 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
11:24:37.939 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[0] f
ilter 0x4e mask 0xff
11:24:37.942 dmxSDT: going to sleep...
11:24:39.992 eit_set_update_filter, servicekey = 0x44100012ee3, current version
8
[timerd] using config file /var/tuxbox/config/timerd.conf
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
$Id: moviebrowser.cpp,v 1.37 2009/11/22 15:36:52 rhabarber1848 Exp $
[mb]->refreshFilterList 20
[movieplayer.cpp] actionKey=tsmoviebrowser
[movieplayer.cpp] executing /var/tuxbox/config/movieplayer.start.
sh: /var/tuxbox/config/movieplayer.start: not found
Datei /var/tuxbox/config/movieplayer.start fehlt. Bitte erstellen, wenn gebrauch
t.
File /var/tuxbox/config/movieplayer.start not found. Please create if needed.
: Success
[zapit] cmd 13 refused in standby mode
[CBasicClient] receive failed: /tmp/zapit.sock
[mp] new MovieBrowser$Id: moviebrowser.cpp,v 1.37 2009/11/22 15:36:52 rhabarber1
848 Exp $
[mb]->refreshFilterList 20
[mp] setting parental to (0)
sh: /var/bin/parental.sh: not found
[mb] start MovieBrowser
[mb]->Paint
[mb] reload
[mb] loadMovies:
[mb] *1: time 1270286701 clock 1498 dclock 5*
[mb] new Dir: /hdd/
[mb] Dir1, Files:1
[mb] *2: time 1270286701 clock 1502 dclock 4*
[mb] *3: time 1270286701 clock 1503 dclock 1*
[mb]->updateSerienames: 0
[mb] *4: time 1270286702 clock 1504 dclock 1*
[mb] *5: time 1270286702 clock 1505 dclock 1*
[mb] *6: time 1270286702 clock 1506 dclock 1*
[mb]->refreshFilterList 20
[mb] *7: time 1270286702 clock 1506 dclock 0*
[mb] ***Total:time 1 clock 13***
[mb] browser info
[mb] stop: 1112 start:0
[mb] res = 1,0
[mb] start pos: 0 s
[mb] saveSettings
[mp] start pos 0, 0 s Name: /hdd/RTL_Television_Gute_Zeiten__schlechte_Zeiten_20
10-03-30_201211.001.ts
[mp] Startplay
[mp] PlayFileThread starts
[mp] found pida[0]: 0x0068, ac3=0
[mp] plain TS file with vpid=(0x00A3) apid=(0x0068) ac3=(0)
[mp] buffer (1633344 bytes) created, using (24) total segments, opt = (18)
[mp] reader thread started ...
[mp] buffering ...
[mp] entering player loop
SPTS, queue 0 extended.
[mi] saveXml: /hdd/RTL_Television_Gute_Zeiten__schlechte_Zeiten_2010-03-30_20121
1.xml
saveFile:1085 saving TS movieinfo: RTL_Television_Gute_Zeiten__schlechte_Zeiten_
2010-03-30_201211.xml
[mp] ... reader thread terminated
[mp] leaving player loop ...
[mp] ... checking for another playlist item
[mp] mp_playFileThread terminated
[mb] start MovieBrowser
[mb]->Paint
[mb] browser info
[mb] saveSettings
[frontend] uncommitted_switch_mode 0 auto_fec 0
[zapit] tuned frequency does not match request. difference: 214
PES, queue 0 normal.
[movieplayer.cpp] executing /var/tuxbox/config/movieplayer.end.
sh: /var/tuxbox/config/movieplayer.end: not found
Datei /var/tuxbox/config/movieplayer.end fehlt. Bitte erstellen, wenn gebraucht.

File /var/tuxbox/config/movieplayer.end not found. Please create if needed.
: Success
PCR discontinuity: PCR: 0x0647BD57E, OLDPCR: 0x0647B4010, Diff: 38254
11:30:36.546 [timeThread] - 03.04.2010 11:30:37, tim: Sat Apr 3 11:30:37 2010
[neutrino] timeset event. difference is 1 s, using adjtime(). oldd: 0 us
11:30:36.597 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
avia_av_wdt_thread: video decoding stopped ==> restart
PCR discontinuity: PCR: 0x06483025D, OLDPCR: 0x06482383B, Diff: 51746
PCR discontinuity: PCR: 0x064917688, OLDPCR: 0x06490E122, Diff: 38246
[zapit] tuned frequency does not match request. difference: 171
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] set emm caid 1702 capid 1000
11:30:55.948 eit_set_update_filter, servicekey = 0x4530001445c, current version
25
$Id: moviebrowser.cpp,v 1.37 2009/11/22 15:36:52 rhabarber1848 Exp $
[mb]->refreshFilterList 20
[movieplayer.cpp] actionKey=tsmoviebrowser
[movieplayer.cpp] executing /var/tuxbox/config/movieplayer.start.
sh: /var/tuxbox/config/movieplayer.start: not found
Datei /var/tuxbox/config/movieplayer.start fehlt. Bitte erstellen, wenn gebrauch
t.
File /var/tuxbox/config/movieplayer.start not found. Please create if needed.
: Success
[zapit] cmd 13 refused in standby mode
[CBasicClient] receive failed: /tmp/zapit.sock
[mp] new MovieBrowser$Id: moviebrowser.cpp,v 1.37 2009/11/22 15:36:52 rhabarber1
848 Exp $
[mb]->refreshFilterList 20
[mb] start MovieBrowser
[mb]->Paint
[mb] reload
[mb] loadMovies:
[mb] *1: time 1270287089 clock 1960 dclock 4*
[mb] new Dir: /hdd/
[mb] Dir1, Files:1
[mb] *2: time 1270287089 clock 1964 dclock 4*
[mb] *3: time 1270287089 clock 1965 dclock 1*
[mb]->updateSerienames: 0
[mb] *4: time 1270287089 clock 1965 dclock 0*
[mb] *5: time 1270287089 clock 1966 dclock 1*
[mb] *6: time 1270287090 clock 1966 dclock 0*
[mb]->refreshFilterList 20
[mb] *7: time 1270287090 clock 1966 dclock 0*
[mb] ***Total:time 1 clock 10***
[mb] browser info
[mb] stop: 257 start:0
[mb] res = 1,0
[mb] start pos: 0 s
[mb] saveSettings
[mp] start pos 0, 0 s Name: /hdd/RTL_Television_Gute_Zeiten__schlechte_Zeiten_20
10-03-30_201211.001.ts
[mp] Startplay
[mp] PlayFileThread starts
[mp] found pida[0]: 0x0068, ac3=0
[mp] plain TS file with vpid=(0x00A3) apid=(0x0068) ac3=(0)
[mp] buffer (1633344 bytes) created, using (24) total segments, opt = (18)
[mp] reader thread started ...
[mp] buffering ...
[mp] entering player loop
SPTS, queue 0 extended.
[mi] saveXml: /hdd/RTL_Television_Gute_Zeiten__schlechte_Zeiten_2010-03-30_20121
1.xml
saveFile:1085 saving TS movieinfo: RTL_Television_Gute_Zeiten__schlechte_Zeiten_
2010-03-30_201211.xml
[mp] ... reader thread terminated
[mp] leaving player loop ...
[mp] ... checking for another playlist item
[mp] mp_playFileThread terminated
[mb] start MovieBrowser
[mb]->Paint
[mb] browser info
[mb] saveSettings
[frontend] uncommitted_switch_mode 0 auto_fec 0
[zapit] tuned frequency does not match request. difference: 171
PES, queue 0 normal.
[movieplayer.cpp] executing /var/tuxbox/config/movieplayer.end.
[camd] set emm caid 1702 capid 1000
sh: /var/tuxbox/config/movieplayer.end: not found
Datei /var/tuxbox/config/movieplayer.end fehlt. Bitte erstellen, wenn gebraucht.

File /var/tuxbox/config/movieplayer.end not found. Please create if needed.
: Success
11:39:24.669 [timeThread] - 03.04.2010 11:39:26, tim: Sat Apr 3 11:39:26 2010
11:39:24.731 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
[neutrino] timeset event. difference is 1 s, using adjtime(). oldd: 0 us
11:39:25.291 eit_set_update_filter, servicekey = 0x4530001445c, current version
25
[zapit] tuned frequency does not match request. difference: 214
PES, queue 0 normal.
11:39:46.514 eit_set_update_filter, servicekey = 0x44100012ee3, current version
8
PCR discontinuity: PCR: 0x0678499EC, OLDPCR: 0x06783F306, Diff: 42726
[zapit] tuned frequency does not match request. difference: 214
PES, queue 0 normal.
avia_gt_dmx: queue 3 overflow (count: 1)
11:40:08.238 eit_set_update_filter, servicekey = 0x44d00016dca, current version
25
[zapit] tuned frequency does not match request. difference: 214
[dmx.cpp:read:200] read(fd, buf, n): Connection timed out
zap failed!

[svenschmi]

Schubs.....
Kann mir keiner helfen?

Sven

[Riker]

Aus dem Bauch heraus Avia Ram oder Avia Problem t - versuch mal die Box immer im SPTS Mode zu nutzen und dann was abzuspielen ob das Problem dann immer ist oder weg.

Gruß Riker

[MariaKrone]

Hallo ,
ich habe das gleiche Problem mit Image 2.3.3 (Nokia 2x ohne Hardware-Mods) beim Abspielen mit Movieplayer über VLC 1.0.1. . SPTS-Treiber sind geladen.
Ich hatte das Problem in einem früheren Image garantiert nicht .

Gruß Maria

[svenschmi]

Ich habe auch erst seit 2.3.3 Probleme. Ab 2.3.3 ging mein automatischer Spindown der Festplatte nicht mehr und nun hat sich das Problem auf den nicht vorhandenen Empfang erweitert.
Habe leider kein 2.3.2 mehr, sonst könnte ich es nochmal genauer testen.....kann das evtl. nochmal jemand bereitstellen?
STPS ist meiner Meinung nach immer aktiv, werde es aber nochmal prüfen.

Das Problem ist echt ätzend, nimmt einem die Freude am HDD-Interface....

Gruß
Sven

[svenschmi]

Also, wenn STPS immer aktiv ist, ändert sich gar nichts. Die Box ist weiter stabil, das Problem mit dem Movieplayer tritt immer noch auf.
Ich habe nun einfach mal ein JtG2.3.2-Image installiert und erste Tests waren erfolgreich. Ich hatte nach dem Movieplayerbetrieb immer noch Empfang.
Werde es nochmal mit dem Abspielen von längeren Aufnahmen testen, aber es sieht schon mal gut aus...

Ich gebe aber noch mal Rückmeldung.

Gruß
Sven

[svenschmi]

So, zur allgemeinen Info, mit 2.3.2 gibt es keine Probleme mit dem Empfang nach dem Movieplayerbetrieb.
Ich lasse nun diese Version laufen und schaue mal wie es dann mit der 2.4er so seine wird, wenn das Release draußen ist.

Schönen Sonntag noch.

Sven

[svenschmi]

So, mit dem 2.3.2 ist das Problem definitiv nicht mehr vorhanden.
Ich habe aus Neugier nochmal das 2.3.3 installiert und dann war das Problem sofort wieder reproduzierbar....

Keine Ahnung was im 2.3.3 anders ist als vorher.....

Gruß
Sven

[svenschmi]

So, habe mal das 2.4.0RC1 eingespielt und habe nach dem Movieplayerbetrieb wieder keinen Empfang.
Ab Version 2.3.3 tritt das auf, keine Ahnung was geändert wurde.....aber scheinbar muss ich mit dem alten Image leben....2.3.2 läuft wie gesagt super.
Kann denn keiner sagen was ab 2.3.3 anders ist das es zu solch einem Problem kommt?
Bin ich der einzige bei dem es nicht funzt??!?!?

Verzweifelter Sven