Verfasst: Do 24 Jul 2008, 14:10
Flashe Dir den neuesten Snapshot vom 23.07.2008, da sind noch Modifikationen im IDE-Treiber drin, die das IDE-Modul resetten.
Code: Alles auswählen
usb 6-2: new high speed USB device using ehci_hcd and address 3
usb 6-2: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 1:0:0:0: Direct-Access ExcelSto r Technology J68 0000 PQ: 0 ANSI: 0
sd 1:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:1: Direct-Access SanDisk SDCFH2-002G 0000 PQ: 0 ANSI: 0
sd 1:0:0:1: [sdb] 4001760 512-byte hardware sectors (2049 MB)
sd 1:0:0:1: [sdb] Write Protect is off
sd 1:0:0:1: [sdb] Mode Sense: 27 00 00 00
sd 1:0:0:1: [sdb] Assuming drive cache: write through
sd 1:0:0:1: [sdb] 4001760 512-byte hardware sectors (2049 MB)
sd 1:0:0:1: [sdb] Write Protect is off
sd 1:0:0:1: [sdb] Mode Sense: 27 00 00 00
sd 1:0:0:1: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 1:0:0:1: [sdb] Attached SCSI removable disk
sd 1:0:0:1: Attached scsi generic sg1 type 0
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 6-2: USB disconnect, address 3
Buffer I/O error on device sda2, logical block 8
lost page write due to I/O error on sda2
Buffer I/O error on device sda2, logical block 17
lost page write due to I/O error on sda2
WARNING: at fs/buffer.c:1169 mark_buffer_dirty()
Pid: 7505, comm: umount Tainted: P 2.6.24-gentoo-r8 #3
[<c016ce66>] mark_buffer_dirty+0x3e/0x8a
[<c01a5428>] journal_update_superblock+0x4a/0x7c
[<c01a585e>] journal_destroy+0xef/0x133
[<c01267d1>] autoremove_wake_function+0x0/0x35
[<c019d477>] ext3_put_super+0x22/0x156
[<c0162b45>] invalidate_inodes+0xac/0xb7
[<c0154c43>] generic_shutdown_super+0x4d/0xb5
[<c0154cb7>] kill_block_super+0xc/0x1b
[<c0154d25>] deactivate_super+0x2c/0x3f
[<c01644ec>] sys_umount+0x19f/0x1bd
[<c0114063>] do_page_fault+0x18c/0x52d
[<c01469f2>] do_munmap+0x193/0x1ac
[<c0103b72>] sysenter_past_esp+0x5f/0x85
=======================
Buffer I/O error on device sda2, logical block 17
lost page write due to I/O error on sda2
Buffer I/O error on device sda2, logical block 0
lost page write due to I/O error on sda2
Code: Alles auswählen
rmmod dboxide
Code: Alles auswählen
Oops: kernel access of bad area, sig: 11
NIP: C394A0F0 XER: 00000000 LR: C38F8F64 SP: C0143760 REGS: c01436b0 TRAP: 0400 Not tainted
MSR: 40001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c0141910[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C394A0F0 C0143760 C0141910 00000017 00001032 C01437F0 FFFFFC18 C01442E8
GPR08: C014CCB8 20000000 C0162FCC C0004BE0 44202082 10037468 01FFAC00 01F8C000
GPR16: 00000000 21509320 00000001 01FA7AA0 00001032 001437E0 00000000 C0002AA0
GPR24: C0003B64 00000001 C1CFBDA0 00000000 0000002F C3900C18 C1F67960 C3900C18
Call backtrace:
C0014EE4 C0003A9C C0003BA0 C0002AA0 C0004338 C0004354 C0153408
C0002138
PCR discontinuity: PCR: 0x0BCABE58D, OLDPCR: 0x0BCAAEE31, Diff: 63324
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..
Code: Alles auswählen
#!/bin/sh
rm /tmp/.tks_startup_complete
if pidof fritzboxcallmon > /dev/null; then
killall fritzboxcallmon
fi
if pidof tuxmaild > /dev/null; then
killall tuxmaild
i=5
while expr $i != 0 > /dev/null; do
if [ -e /tmp/tuxmaild.pid ]; then echo "Waiting for tuxmaild (max. $i seconds)"
else break;
fi
i=`expr $i - 1`
sleep 1
done
fi
umount /hdd || touch /tmp/.tks_unmount_failed
umount /mnt/slave || touch /tmp/.tks_unmount_failed
if [ ! -e /tmp/.tks_unmount_failed ] ; then
rmmod ide-detect
rmmod ide-disk
rmmod dboxide
rmmod ide-core
fi
Code: Alles auswählen
fritzboxcallmon.addr -> /mnt/slave/var/tuxbox/config/fritzboxcallmon.addr
fritzboxcallmon.conf -> /mnt/slave/var/tuxbox/config/fritzboxcallmon.conf
tuxmail -> /mnt/slave/var/tuxbox/config/tuxmail
Code: Alles auswählen
#!/bin/sh
/etc/init.d/start_neutrino &
sleep 30
/mnt/slave/bin/fritzboxcallmon
/bin/tuxmaild
touch /tmp/.tks_startup_complete
Code: Alles auswählen
if [ -e /tmp/.tks_startup_complete ] ; then
echo "!!!!!!!!!!!!!!!local profile in use!"
export PATH="/mnt/slave/bin:/var/bin:/sbin:/bin:/var/plugins:/hdd/bin"
export LD_LIBRARY_PATH="/tmp/lib:/mnt/slave/lib:/var/lib:/lib"
export HOME=/mnt/slave/root
fi