kleinere Probleme mit dem Snapshot 16.06.2007

Nachricht

ralix · #1 Beitrag von **ralix** » Do 21 Jun 2007, 5:52

Moin

also ich hab das 2 Probleme mit dem letzten SnapShot bzw. das trat
auch schon bei dem letzten experimental Image auf.

Ich habe ein Bouquet wo alle freien Sender drin sind, schalte ich dann
zb auf das Premiere Bouquet und wähle einen Sender aus ok. Wenn ich
jetzt aber wieder mit Ok das Premiere Bouquet aufrufe befinde ich mich
in einem ganz anderen wo alle Sender wahlos geordnet rum liegen.
Ich hoffe das war verständlich.

Die zweite Sache ist die das ich wenn ich in der EPG Anzeige bin und
mit der roten Taste ne Aufnahme programmieren will, geht das nicht
mehr. Ich habe dann in Einstellen irgendwo etwas gefunden wo ich
das einstellen kann. Naja geht trotzdem nicht. Das komische in halt
das es vorher ging, und bei einem update der doch nichts überschreibt
in der neutrino.config sondern nur erweitert oder?

MFG Ralix

ThulsaDoom · #2 Beitrag von **ThulsaDoom** » Do 21 Jun 2007, 7:39

Hi!

Also ich habe auch ein eigenes Bouquet mit Free-TV Sendern angelegt. Sind immer genau 99 damit Premiere mit 100 startet (tut hier aber nix zur Sache). Kann dein erstes Problem nicht nachvollziehen! Bei mir geht nach wie vor das zappen ohne Probleme auch in der von Dir beschriebenen Art und Weise!

Auch mit dem Aufnehmen über Rot/ok/Rot habe ich keinerlei Probs. Geht nach wie vor! Ich habe das Update online über Experten-Funktion gemacht. Vorher war der Snap vom 24.05 drauf!

Vielleicht hilft es, die Senderlisten nochmal über ftp einzuspielen (sofern Du davon eine Sicherung hast) !

Gruß
ThulsaDoom

ralix · #3 Beitrag von **ralix** » Do 21 Jun 2007, 12:38

Moin,

Senderlisten neu einspielen hat leider nix gebracht.
Egal hab einfach alles neu eingespielt JtG-2.2.4 und dann den Snapshot rüber.

So geht wieder alles

Keine Ahnung was das war.

MfG Ralix

ThulsaDoom · #4 Beitrag von **ThulsaDoom** » Do 21 Jun 2007, 16:59

Na also !

Gruß
ThulsaDoom

Gorcon · #5 Beitrag von **Gorcon** » Do 21 Jun 2007, 17:05

Meine Sagem mochte das Update auch nicht so richtig. sie fährt hoch und schaltet sich dann sofort wieder ab.
Hier ein Log (allerdings ohne Antennensignal)

Code: Alles auswählen

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 162700
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (May  6 2007 - 21:31:13)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.1
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: .. done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 704080 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    704016 Bytes = 687.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.34.4-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #1 Mi 30. Mai 2
0:58:20 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30760k available (1200k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:39:5f:96
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.6.0 (2007-06-07 23:45:40 CEST) multi-call binary
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38aa000
Probing IDE interface ide0...
hda: SAMSUNG HD300LD, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2
ds1307: $Id: ds1307.c,v 1.1 2005/08/27 01:59:05 chakazulu Exp $
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
ds1307: I2C Real-Time-Clock detected at addr 0x68
[i2c-8xx]: adapter: 0
SGI XFS with no debug enabled
Adding Swap: 1028148k swap-space (priority -1)
XFS mounting filesystem ide0(3,2)
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

/dev/ide/host0/bus0/target0/lun0/disc:
 setting drive write-caching to 0 (off)
 setting standby to 60 (5 minutes)

/dev/ide/host0/bus0/target0/lun0/disc:
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
 setting drive write-caching to 0 (off)
 setting standby to 60 (5 minutes)
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Started with correct system time
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timeThread] Time is already set by system, trying to sync it via DVB
[CBasicClient] receive failed: /tmp/sectionsd.sock
$Id: zapit.cpp,v 1.398 2007/06/16 10:05:27 houdini Exp $
[frontend] uncommitted_switch_mode 0
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
[getservices]: removing 'ARD-MHP-Data' (service_id=0x6e5a): FAILED!
[getservices] dup transponder id 42A onid 1
[getservices]: removing 'MTV Hits.' (service_id=0x6ff8): FAILED!
[getservices]: removing 'MTV Base.' (service_id=0x6ff9): FAILED!
[getservices]: removing 'VH1.' (service_id=0x6ffa): FAILED!
[getservices]: removing 'MTV2.' (service_id=0x6ffd): FAILED!
[getservices] dup transponder id 52D onid 52D
[getservices] dup transponder id 75F9 onid 52D
[getservices] dup transponder id 75FA onid 52D
[getservices] dup transponder id 1 onid A044
[getservices]: removing 'DECIMUS_DL' (service_id=0x4e93): FAILED!
[getservices]: removing 'TT STB Update' (service_id=0x4e94): FAILED!
[getservices] dup transponder id 1FA4 onid 13E
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 1 a1 = 0 v2 = 0 a2 = 0 fblk=0
[controld] setting VideoFormat to auto 
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
 /bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[CBasicClient] receive failed: /tmp/sectionsd.sock
[neutrino] menue setup
[controld] setting VideoFormat to auto 
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[basicsocket] receive_data: Connection reset by peer
[CBasicClient] receive failed: /tmp/sectionsd.sock
[controld] setting VideoFormat to auto 
[CBasicClient] receive failed: /tmp/sectionsd.sock
[neutrino] initialized everything
[CBasicClient] receive failed: /tmp/sectionsd.sock
[CBasicClient] receive failed: /tmp/sectionsd.sock
[CBasicClient] receive failed: /tmp/sectionsd.sock
[CBasicClient] receive failed: /tmp/sectionsd.sock
[CBasicClient] receive failed: /tmp/sectionsd.sock
[CBasicClient] receive failed: /tmp/sectionsd.sock
zap failed!
[CBasicClient] receive failed: /tmp/sectionsd.sock
[sectionsd] getUTC: read: Connection timed out
[timeThread] Time is already set by system, trying to sync it via DVB
[CBasicClient] receive failed: /tmp/sectionsd.sock
[CBasicClient] receive failed: /tmp/sectionsd.sock
Segmentation fault
zapit shot down :)
Waiting for controld (max. 5 seconds)
Waiting for controld (max. 4 seconds)
Waiting for controld (max. 3 seconds)
[eventserver]: connect (/tmp/neutrino.sock): Connection refused
Waiting for controld (max. 2 seconds)
Waiting for controld (max. 1 seconds)
Going to halt system now ...
CXA2126 found
CXA2126 found
You need to specify whom to kill
Unmounting 'xfs' on '/hdd'
Unmounting 'tmpfs' on '/tmp'
umount: cannot umount /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
umount: forced umount of /var failed!
umount: cannot umount /var: Device or resource busy
Oops: umount failed :-(  --  trying to remount readonly...
Ready to shutdown system...
The system is going down NOW!
Sending SIGTERM to all processes
[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for writing.
[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for writing.
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sending SIGKILL to all processes
nfsd: last server has exited
nfsd: unexporting all filesystems
Requesting system halt
flushing ide devices: hda

.
Ich werde dann erstmal wieder neu flashen (ist aber kein Beinbruch!

)

Gruß Gorcon