HELP : HDD mit Nokia & IDE-Sata Aufnahme nicht möglich

Hard- und Software Fragen rund um die dbox2 - außer zu, JtG-Team-Image
Antworten
Nachricht
Autor
Benutzeravatar
shumway65
Einmal-Streamer
Einmal-Streamer
Beiträge: 4
Registriert: Sa 06 Mär 2010, 21:38

HELP : HDD mit Nokia & IDE-Sata Aufnahme nicht möglich

#1 Beitrag von shumway65 » Do 25 Mär 2010, 18:26

hallo Leute,
ich bräuchte
Hilfe hab ne Nokia DBOX 2 AVIA500 Kabel mit IDE-Sata Interface von dbox2.net mit RTC, habe alles von einem Fachmann einbauen lassen,da ich mir und meinem Lötkolben dies nicht zugetraut habe.
leider kann ich nicht auf HDD aufnehmen weder IDE noch SATA, habe 2 verschiedene 2,5" IDE Platten ( 40Gb und 60Gb ) und zwei verschieden 3,5" EsataPlatten (250Gb) probiert mit verschiedenen Kabeln.
ich kann die Platten im JTG Image formatieren, werden auch nach Neustart angezeigt aber eine Aufnahme scheitert mit: Aufnahmeverzeichnis nicht beschreibbar.

im Bootlog wird Interface,RTC und HDD erkannt ich finde aber bei der Platte:SectorIdNotFound ..und .DriveReady SeekComplete DataRequest Error .... egal welche Platte ich ausprobiere ob die microSD drin oder draussen ist.


bin langsam am verzweifeln und für jedwede ratschläge dankbar ( meine Linuxkenntnis sind gleich 0,0001 ) ;-)

anhängend das Bootlog erstellt unter WIN XP

shumway65


Ýdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-ac.7a.1c.07.00.00-9c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/o
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 170380
verify sig: 262
Branching to 0x40000


U-Boot 2009.08 (Tuxbox) (04.12.09 09:04:31)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 671124 bytes loaded to 0x2000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.7-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 671060 Bytes = 655.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.7-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #1 Fr 4. Dez 08:
42:33 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:f3:b2
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Ta
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.15.2 (2009-12-04 09:15:43 CET)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Sti
udhcpc (v1.15.2) started
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Sending discover...
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
dboxide: $Id: main.c,v 1.14 2009/06/19 14:39:26 seife Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc394f000
dboxide: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab
dboxide: sreset succeeded
Sending discover...
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Probing IDE interface ide0...
hda: HT[726860M9AT08 ( ( ( ( ( (, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 117210240 sectors (60012 MB) w/7877KiB Cache, CHS
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Sending discover...
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=134217729, sector=0
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=134217729, sector=0
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=134217729, sector=0
avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $
ide0: reset: success
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=134217729, sector=0
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 500 LB4 found, sptsfix is on
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=134217729, sector=0
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=134217729, sector=0
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=134217729, sector=0
ide0: reset: success
hda: read_intr: status=0x59 { DriveReady S
hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=134217729, sector=0
end_request: I/O error, dev 03:01 (hda), sector 0
Unable to find swap-space signature
swapon: /dev/ide/host0/bus0/target0/lun0/part1: Invalid argument
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid a
rgument
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

/dev/ide/host0/bus0/target0/lun0/disc:
setting 32-bit IO_support flag to 1
setting drive write-caching to 0 (off)
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
/share/udhcpc/default.script: exec: line 7: /share/udhcpc/sample.leasefail: avia
_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
not found
setting standby to 0 (off)
No lease, forking to background
IO_support = 1 (32-bit)
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
write-caching = 0 (off)
ds1307: $Id: ds1307.c,v 1.1 2005/08/27 01:59:05 chakazulu Exp $
ds1307: I2C Real-Time-Clock detected at addr 0x68
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
ves1820_v13 was compiled for kernel version 2.4.35.3-dbox2
while this kernel is version 2.4.37.7-dbox2
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Journalled Block Device driver loaded
mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $
mmc2: Hardware init
mmc: Card init
mmc: Card init *OK1*
mmc: Card init *OK2*
mmc: Media found Size = 1006080, hardsectsize
mmca:
mount: mounting /dev/mmc/disc0/part1 on /mnt/mmc failed: No such file or directo
ry
$Id: sectionsd.cpp,v 1.315 2009/11/30 21:50:26 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[frontend] uncommitted_switch_mode 0 auto_fec 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[camd] ca system id: 1722
[CVideo::setVideoFormat] output format: 4:3(LB)
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[neutrino] menue se
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 11 providers
[CVideo::setVideoFormat] output format: 16:9
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit 15
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
17:47:37.718 [timeThread] - 25.03.2010 17:47:39, tim: Thu Mar 25 17:47:39 2010
17:47:37.780 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
[neutrino] timeset event. difference is 2 s, using adjtime(). oldd: 0 us
17:47:38.791 dmxSDT: going to sleep...
17:47:38.883 eit_set_update_filter, servicekey = 0x453a018445e, current version
0
[timerd] using config file /var/tuxbox/config/timerd.conf
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (16:9 -> 4:3)

Benutzeravatar
Stingray!
Site Sponsor
Site Sponsor
Beiträge: 35
Registriert: Mi 29 Okt 2008, 18:30
Wohnort: dbox2.net
Kontaktdaten:

Re: HELP : HDD mit Nokia & IDE-Sata Aufnahme nicht möglich

#2 Beitrag von Stingray! » Do 25 Mär 2010, 19:46

Die Festplatte wird nicht korrekt erkannt.

Mögliche Fehlerursachen:
- Ram-Port verunreinigt
- Ram-Port defekt
- Prozessor defekt

Benutzeravatar
shumway65
Einmal-Streamer
Einmal-Streamer
Beiträge: 4
Registriert: Sa 06 Mär 2010, 21:38

Re: HELP : HDD mit Nokia & IDE-Sata Aufnahme nicht möglich

#3 Beitrag von shumway65 » Do 25 Mär 2010, 19:54

thx, hatte sie ja schon kurz nach dem kauf per mail kontaktiert ( wusste nicht wo die rtc bauteile genau hingehören :wink: da hatten sie mir ja schon mit fotos geholfen )
werd das mal testen, verunreinigung wäre evtl möglich, weis nicht ob ich den port vor dem aufsetzen des interfaces vom staub befreit hatte.
hatte auch schon wo anders gelesen dass die abstandshülsen evtl zu lang sein könnten
für das grosse chaos habe ich meinen pc, den rest besorg ich selbst

hardware:
nokia avia500 mit IDE Sata Interface an Samsung LE46B650
AMD Phenom II X4 940BE auf Asrock A770DE
mit 3x Samsung Sata HDD 750GB,1x Esata HDD Samsung 250Gb
Windows 7 home premium

Benutzeravatar
Stingray!
Site Sponsor
Site Sponsor
Beiträge: 35
Registriert: Mi 29 Okt 2008, 18:30
Wohnort: dbox2.net
Kontaktdaten:

Re: HELP : HDD mit Nokia & IDE-Sata Aufnahme nicht möglich

#4 Beitrag von Stingray! » Do 25 Mär 2010, 20:10

Auf KEINEN Fall Kontakspray zum reinigen des Ramports nutzen.
Vorsorglich sollten dann sowohl der Ramport als auch der Ram-Stecker vom Interface z.B. mit Ethanol gereinigt werden.

Alternativ Box mit Interface zwecks Überprüfung einschicken.

Benutzeravatar
shumway65
Einmal-Streamer
Einmal-Streamer
Beiträge: 4
Registriert: Sa 06 Mär 2010, 21:38

Re: HELP : HDD mit Nokia & IDE-Sata Aufnahme nicht möglich

#5 Beitrag von shumway65 » Fr 26 Mär 2010, 9:00

habe nun den port mit isopropylalkohol und einer weichen zahnbürste gereinigt, keine änderung
aber in den bootlogs hat sich was geändert. habe 2 stück erstellt einmal mit interner ideplatte als master ohne angeschlossenen esata , 1x esata als master ohne interne hdd
interne IDE HDD


cfi_cmdset_0001: Erase suspend on write enabled
env: found lcd_contrast
Creating 6 MTD partitions on "D-Box 2 flash memory":nv: found lcd_bias with value 0
0x00000000-0x00020000 : "BR bootloader" serial
Out: serial
0x00020000-0x00040000 : "FLFS (U-Boot)"et: SCC ETHERNET
L
0x00040000-0x006a0000 : "root (squashfs+lzma)"Console on null
2: Conso
0x006a0000-0x00800000 : "var (jffs2)"Console on framebuffer
0x00020000-0x00800000 : "Flash without bootloader"p autoboot: 0
0x00000000-0x00800000 : "Complete Flash".......................................
Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice
### FS (squashfs) loading 'vmlinuz' to 0
NET4: Linux TCP/IP 1.0 for NET4.0
### FS load
IP Protocols: ICMP, UDP, TCP to 0x2000
Load Address: 00000000
Mounted devfs on /dev Point: 00000000
Freeing unused kernel memory: 60k initksum ... OK
init started: BusyBox v1.15.2 (2009-12-04 09:15:43 CET)
Linux version 2.4.37.7-dbox2 (vom Jt
starting pid 8, tty '': '/etc/init.d/rcS'8:
Starting the automounter
42:33 C
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
zone(0): 8192 pages.
tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Sti

Calibrating dela
dboxide: $Id: main.c,v 1.14 2009/06/19 14:39:26 seife Exp $
Memory: 30824k available (1144k kernel code, 340k data
ide: late registration of driver.
dboxide: activating cs2
Dentry cache
dboxide: address space of IDE-Interface is at: 0xc394f000
Inode
dboxide: IDE-Interface detected, Vendor: Unknownbytes)
Linux NET4.0 for Linux 2.4
Probing IDE interface ide0...sea University Computer Socie
hda: HT_726<60M=AT0< , , , , , ,, ATA DISK drive
Initializing RT netlink socket
ide0 at 0x010-0x017,0x04e on irq 47ing kswapd
devfs: v1
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
hda: attached ide-disk driver. 0x1
J
hda: host protected area => 1001-2003 Red Hat, Inc.
hda: task_no_data_intr: status=0x51 { DriveReady SeekC: version 3.0 (2006/03/
CPM UART drive
/dev/ide/host0/bus0/target0/lun0:hda: read_intr: status=0x51 { DriveReady SeekCyS1 at 0x0380 is on SMC2 using BRG2
omplete Error }
pt
hda: read_intr: error=0x04 { DriveStatusError }
half-duplex mode enabled
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }:9c:1f:f3:b2
hda: read_intr: error=0x04 { DriveStatusError }
D-Box 2 flash driver (size-
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
D-Box 2 flash memory: Found 2 x16 devices a
hda: read_intr: error=0x04 { DriveStatusError }
Intel/Shar
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }x00040000-0x006a0000 : "root (squashfs+lzma)"
hda: read_intr: error=0x04 { DriveStatusError }0000 : "var (jffs2)"
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
0x00000000-
hda: read_intr: error=0x04 { DriveStatusError }
Linux video capture inter
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }se device common for all mice
hda: read_intr: error=0x04 { DriveStatusError }
IP Protocols: IC
hda: read_intr: status=0x51 { DriveR

Mounted devfs on /dev
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
init started: BusyBox v1.15.2 (2009
hda: read_intr: error=0x04 { DriveStatusError }
starting pid 8, tty
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
Starting the automounter
event: $Id
hda: read_intr: error=0x04 { DriveStatusError }
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }t.ahab/Sti
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
$Id: cam.c,v 1.30 20
hda: read_intr: error=0x04 { DriveStatusError }
dboxide: $Id: ma
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
ide: late registrati
hda: read_intr: error=0x04 { DriveStatusError }boxide: activating cs2
d
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
dboxide:
hda: read_intr: error=0x04 { DriveStatusError }ahab
Probing I
end_request: I/O error, dev 03:00 (hda), sector 2hda: HT[726860M9AT08 ( ( ( ( ( (, ATA DISK drive
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }0x017,0x04e on irq 47
$Id:
hda: read_intr: error=0x04 { DriveStatusError }
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: host protected area => 1
hda: read_intr: error=0x04 { DriveStatusError }he, CHS
hda: read_i
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }IdNotFound }, LBAsect=134217729, sector=0
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: status=0x59 { DriveReady SeekComplet
hda: read_intr: error=0x04 { DriveStatusError }

hda: read_intr: status=0x51 { DriveReady SeekComplete Er
/share/udhcpc/default.script: exec: line 7: /share/udhcpc/sample.leasefail: ide0
ide0: reset: success
: reset: success
hda: read_in
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }dNotFound }, LBAsect=134217729, sector=0
end_request: I/O error, dev 03:00 (hda), sector 4
avia_av_core: Starting avia_a
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }v: AVIA 500 LB4 found, sptsfix is on
hda: read_intr: error=0x04 { DriveStatu
hda: read_intr: error=0x04 { DriveStatusError }
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }BAsect=134217729, sector=0
hda: read_intr: error=0x04 { DriveStatusError }ead_intr: status=0x59 { DriveReady SeekComplete
not foundst Error
No lease, forking to background
ide0: reset: success_intr: error=0x10 {
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
hda: read_intr: error=0x04 { DriveStatusError }ead_intr: status=0x59 { DriveReady S
hda: read_intr: error=0x04 { DriveStatusError }error, dev 03:01 (hda), sector 0
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }ignature
swapon: /dev/ide/
hda: read_intr: error=0x04 { DriveStatusError }
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }03/10/26 16:32:51 obi Exp $
hda: read_intr: error=0x04 { DriveStatusError }unting /dev/ide/host0/bus0/target0/lun0/part2 o
ide0: reset: successd a
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
rgument
avia_av_proc: $Id: avia_av_proc.c,v 1.15 200
hda: read_intr: error=0x04 { DriveStatusError }
end_request: I/O error, dev 03:00 (hda), sector 6

avia_gt_core: autodetecting chip type...
hda: read_intr: error=0x04 { DriveStatusError }avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
avia_gt_accel: $Id: avia_gt_accel
hda: read_intr: error=0x04 { DriveStatusError }
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }06/26 16:08:15 carjay Exp $
hda: read_intr: error=0x04 { DriveStatusError }ore: masking unhandled irq reg 1 bit 11
avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $reg 1 bit 13

hda: read_intr: status=0x51 { DriveReady SeekComplete Error }a_gt_core: masking unhandled irq reg 0 bit 6
hda: read_intr: error=0x04 { DriveStatusError }avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
avia_gt_gv: set_input_size (width=720, height=57
hda: read_intr: error=0x04 { DriveStatusError }
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 200
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
avia_gt_pcm_set_rate(44100
hda: read_intr: error=0x04 { DriveStatusError }d: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35
avia_av_core: Starting avia_av_wdt thread.
end_request: I/O error, dev 03:00 (hda), sector 0ne 7: /share/udhcpc/sample.leasefail: avia
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17
hda: read_intr: error=0x04 { DriveStatusError }
avia_gt
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
avia_gt_gv: set_input_size (width=720, height=576)
hda: read_intr: error=0x04 { DriveStatusError }t_gv: set_input_mode (mode=2)
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }t=576)

hda: read_intr: error=0x04 { DriveStatusError }
avia_gt_fb: fb0: AViA eNX/GTX F
ide0: reset: successer device
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
setting standby to 0 (off)
hda: read_intr: error=0x04 { DriveStatusError }
IO_support = 1 (32-bit)
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
lcd.o: found KS0713/SED153X lcd inter
hda: read_intr: error=0x04 { DriveStatusError }rite-caching = 0 (off)
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }p $
hda: read_intr: error=0x04 { DriveStatusError }dr 0x68
avia_gt_pcm_set_rate(44
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
hda: read_intr: error=0x04 { DriveStatusError }
insmod: warning: kernel-module version mismat
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ compiled for kernel version 2.4.35.3-dbox2
hda: read_intr: status=0x51 { DriveReady Se
hda: read_intr: error=0x04 { DriveStatusError }
avia_av_napi.c: $Id: avia_av_na
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
avi
hda: read_intr: error=0x04 { DriveStatusError }5 05:49:56 carjay Exp $
ide0: reset: success
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/
hda: read_intr: error=0x04 { DriveStatusError }
mmc2:
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }mmc: Card init *OK1*
mmc: Card init *OK2*
hda: read_intr: error=0x04 { DriveStatusError }6080, hardsectsize
[sectionsd] Caching max 6000 events
hda: read_intr: error=0x04 { DriveStatusError }4 days
[sectionsd] C
ide0: reset: successed Text
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }after their end time
hda: read_intr: error=0x04 { DriveStatusError }xml: No such file or directory
end_request: I/O error, dev 03:00 (hda), sector 4var/tuxbox/config/zapit/dvbtimefilter.xml: No suc
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
/var/tuxbox/config/mybouquets.xml:
hda: read_intr: error=0x04 { DriveStatusError }

hda: read_intr: error=0x04 { DriveStatusError }ar/tuxbox/config/zapit/ubouquets.xml: No such f
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }
/tmp/currentservices.xml: No such file or
hda: read_intr: error=0x04 { DriveStatusError }
[controld] Boxtype detected: (1,
ide0: reset: success
hda: read_intr: status=0x51 { DriveReady SeekComplete Error } a2 = 1 v3 = 0 a3 = 1 fblk=1
hda: read_intr: error=0x04 { DriveStatusError } system id: 1722
[CVid
hda: read_intr: status=0x51 { DriveReady SeekComplete Er

hda: read_intr: error=0x04 { DriveStatusError }
812k video mem
avia_gt_gv: set
ide0: reset: success
hda: read_intr: status=0x51 { DriveReady SeekComplete Error }76)
[neutri
hda: read_intr: error=0x04 { DriveStatusError }
[neutrino] enable flash
end_request: I/O error, dev 03:00 (hda), sector 6default...
unable to read partition tablefound -> using default...
[LCDF
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
[LCDFONT] Intializing fon
avia_gt_core: autodetecting chip type... GTX
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $/config/rc.conf was found
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Ex
[neutrino] menue se
avia_gt_ucode: loaded ucode v0014argument)
avia_gt_ucode: ucode section filters disabled.[neutrino] setRepeat: delay=25 period=0 use ke
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...eutrino] registering as event client
[sc
avia_gt_core: masking unhandled irq reg 0 bit 6
[CVideo::setVideoFormat] outp
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $FTC_Face_Requester (Fix15/Bold)
avia_gt_gv: set_input_size (width=720, height=576)t_core: masking unhandled irq reg 1 bit
17:47:37.718 [timeThread] - 25.03.2010 17:47:39, ti
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
17:47:37.780 [timeThread] Time
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
[neutrino] time
avia_gt_core: Loaded AViA eNX/GTX driverme(). oldd: 0 us
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ng to sleep...
17:47:38.883 eit_se
avia_gt_gv: set_input_mode (mode=2)018445e, current version
avia_gt_gv: set_input_size (width=720, height=576)
0


/dev/ide/host0/bus0/target0/lun0/disc:DFONT] adding font /share/fonts/micron
setting 32-bit IO_support flag to 1
setting drive write-caching to 0 (off)g font /share/fonts/pakenham.ttf...OK (
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interfacetializing font cache...
setting standby to 0 (off)ebserver starting...
ds1307: $Id: ds1307.c,v 1.1 2005/08/27 01:59:05 chakazulu Exp $ BogoMIPS
ds1307: I2C Real-Time-Clock detected at addr 0x68
debug: feID 7a gtxID 0b
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
debug: HWrev X5
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
WATCHDOG reset enabled
dbo
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $)
debug:
debug: Transmitti
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
debug: Given up BOOTP/TFTP boot
boot net f
avia_gt_pcm_set_rate(44100)FS bootstrap loader (v1.5)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2h-FS superblock
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $s Silicon Bugs -- Check the Errata ***
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Watchdog enabled
I2C:
Journalled Block Device driver loaded
FLASH: 8 MB
Scanni
mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $e with value ttyS0

mount: mounting /dev/mmc/disc0/part1 on /mnt/mmc failed: No such file or directo serial
Out: serial
Err: serial
Net:
ryCC
$Id: sectionsd.cpp,v 1.315 2009/11/30 21:50:26 seife Exp $ons:
1: Console on null
2:
[sectionsd] Caching max 6000 events
3: Console on framebuffer
[sectionsd] Caching 14 dayst option (1-3), other keys
[sectionsd] Caching 6 hours Extended Text
..........
[sectionsd] Events are old 60min after their end timedone
/var/tuxbox/config/zapit/epgfilter.xml: No such file or direc
### FS (squashfs) loading 'v
[camd] ca system id: 1722
[CVideo::setVideoFormat] output format: 4:3(LB)y = 252000000/60
neutrino: /lib/libpng12.so.0: no version information available (required by neut
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
Calibrating delay loop... 66.96 BogoMIPS
/liblcddisplay.so.0)
Memory:
starting /bin/neutrino kernel code, 340k dat
[neutrino] frameBuffer Instance created
812k video mem
Dentry
avia_gt_gv: set_input_mode (mode=2)er: 3, 32768 bytes)
avia_gt_gv: set_input_size (width=720, height=576) cache hash table entries: 2048 (order: 2
[neutrino] Softwar
debu

[lcdd] date-skin not found -> using default...32768 bytes)
deb
[lcdd] month-skin not found -> using default...ing by UNIFIXEx/Fl(MB) 32/00/08
[LCDFONT] initializing core...led
Based
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular))
de
Initializing RT netlink so
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 11 providers
[CVideo::setVideoFormat] output format: 16:9
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
zap failed!
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
und hier mit esata
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
/share/udhcpc/default.script: exec: line 7: /share/udhcpc/sample.leasefail: avia
_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
not found
setting standby to 0 (off)
No lease, forking to background
IO_support = 1 (32-bit)
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
write-caching = 0 (off)
ds1307: $Id: ds1307.c,v 1.1 2005/08/27 01:59:05 chakazulu Exp $
ds1307: I2C Real-Time-Clock detected at addr 0x68
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
ves1820_v13 was compiled for kernel version 2.4.35.3-dbox2
while this kernel is version 2.4.37.7-dbox2
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Journalled Block Device driver loaded
mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $
mmc2: Hardware init
mmc: Card init
mmc: Card init *OK1*
mmc: Card init *OK2*
mmc: Media found Size = 1006080, hardsectsize
mmca:
mount: mounting /dev/mmc/disc0/part1 on /mnt/mmc failed: No such file or directo
ry
$Id: sectionsd.cpp,v 1.315 2009/11/30 21:50:26 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[frontend] uncommitted_switch_mode 0 auto_fec 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[camd] ca system id: 1722
[CVideo::setVideoFormat] output format: 4:3(LB)
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[neutrino] menue se
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 11 providers
[CVideo::setVideoFormat] output format: 16:9
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
17:47:37.718 [timeThread] - 25.03.2010 17:47:39, tim: Thu Mar 25 17:47:39 2010
17:47:37.780 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
[neutrino] timeset event. difference is 2 s, using adjtime(). oldd: 0 us
17:47:38.791 dmxSDT: going to sleep...
17:47:38.883 eit_set_update_filter, servicekey = 0x453a018445e, current version
0
[timerd] using config file /var/tuxbox/config/timerd.conf
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (16:9 -> 4:3)
Ýdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-ac.7a.1c.07.00.00-9c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 170380
verify sig: 262
Branching to 0x40000


U-Boot 2009.08 (Tuxbox) (04.12.09 09:04:31)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'v
### FS load complete: 671124 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.7-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 671060 Bytes = 655.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.7-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #1 Fr 4. Dez 08:
42:33 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2
Mount cache hash table entries: 512 (order: 0, 4096 bytes)ogoMIPS
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
debug: feID 7a gtxID 0b
debu
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
debug: HWrev X5 SWrev 0.81
POSIX conformance testing by UNIFIXEx/Fl(MB) 32/00/08
Linux NET4.0 for Linux 2.4nabled
Based upon Swansea University Computer Society NET3.039trap loader (v0.3)
de
Initializing RT netlink socketBOOTP request via broadcast
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
boot net failed

Flash-FS boots
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Found file /root/platform/nok
squashfs: version 3.0 (2006/03/

pty: 256 Unix98 ptys configuredn Bugs -- Check the Errata ***
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:f3:b2
Watchdog enabled
loop: loaded (max 8 devices)
DRAM: 32 MB
D-Box 2 flash driver (size->0x800000 mem->0x10000000).
env: found console with v
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit banke with value 9600
env: found
Intel/Sharp Extended Query Ta
0x006a0000-0x00800000 : "var (jffs2)"Console on framebuffer
0x00020000-0x00800000 : "Flash without bootloader"p autoboot: 0
0x00000000-0x00800000 : "Complete Flash".......................................
Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice
### FS (squashfs) loading 'vmlinuz' to 0
NET4: Linux TCP/IP 1.0 for NET4.0
### FS load
IP Protocols: ICMP, UDP, TCP to 0x2000
Load Address: 00000000
Mounted devfs on /dev Point: 00000000
Freeing unused kernel memory: 60k initksum ... OK
init started: BusyBox v1.15.2 (2009-12-04 09:15:43 CET)
Linux version 2.4.37.7-dbox2 (vom Jt
starting pid 8, tty '': '/etc/init.d/rcS'8:
Starting the automounter
42:33 C
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
zone(0): 8192 pages.
tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Sti

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ating delay loop... 66.96 BogoMIPS
dboxide: $Id: main.c,v 1.14 2009/06/19 14:39:26 seife Exp $rnel code, 340k data, 60k init, 0k highmem)
ide: late registration of driver.
Dentr
dboxide: activating cs2es: 4096 (order: 3, 327
dboxide: address space of IDE-Interface is at: 0xc394f000
Inode cache hash table entries: 2048 (order:
dboxide: IDE-Interface detected, Vendor:

Linux NET4.0 for Linux 2.
Probing IDE interface ide0...sed upon Swansea University C
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Initializing RT netlink
Sending discover...
S
swapon: can't stat '/dev/ide/host0/bus0/target0/lun0/part1': No such file or dir.csiro.au)
devfs: b
ectoryions:
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f
squashfs: version 3.0 (200
ile or directory
pty: 256
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $abled
eth0: CPM ENET Version 0.2.dbox2 on SCC2,
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
loop: loaded (max 8 devices)
D-Box 2 fla
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in
avia_gt_core: autodetecting chip type... GTX
Intel/Sharp
avia_gt_core: masking unhandled irq reg 1 bit 13der"
avia_gt_ucode: loaded ucode v0014mplete Flash"
avia_gt_ucode: ucode section filters disabled.ace: v1.00
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
NET4: Linux TCP/IP 1.0 for NET4.0
IP
avia_gt_core: masking unhandled irq reg 0 b

avia_gt_pcm_set_rate(44100)
Mounted devfs
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
init started: BusyBox v1.15.2 (2009-12-04 09:1
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ting pid 8, tty '': '/etc/init.d/rcS'
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $d: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driverx: IDE-Interface detected, Vendor: DboxB
/share/udhcpc/default.script: exec: line
ide
avia_gt_gv: set_input_mode (mode=2)r PIO modes; override with idebus=x
avia_gt_gv: set_input_size (width=720, height=576)
$Id: cam.c,v 1.30 2004/0
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576) seife Exp $
Console: switching to colour frame buffer device 82x32
dboxide: activating
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer deviceface is at: 0xc394f000
not found

No lease, forking to background Vendor: DboxBaer or kpt.ahab
lcd.o: init lcd driver module
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
hda: HT[726860M9AT08 ( ( ( ( ( (, ATA DISK drive
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $0x04e on irq 47
$Id: cam_napi.c
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
hda: attached ide-disk driver.
hd
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04S
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
hda: read_intr: status=0x59 { DriveReady Se
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
hda: read_intr: error=0x10 { SectorIdNotFound }
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
hda: read_intr: status=0x59 { DriveReady Se
Journalled Block Device driver loaded
mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $IdNotFound }, LBAsect
mmc: Media found Size = 1006080, hardsectsize = 512, sectors = 2012160r=0
Partition check:: $Id: avia_av_c
mmca: 1.100
mount: mounting /dev/mmc/disc0/part1 on /mnt/mmc failed: No such file or directo
ide0: reset: success
hda
ryea
$Id: sectionsd.cpp,v 1.315 2009/11/30 21:50:26 seife Exp $rror }
[sectionsd] Caching max 6000 events: error=0x10 { SectorIdNotFound },
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
avia_av_core: Starting avia_av_wdt
[sectionsd] Events are old 60min after their end timea_av: AVIA 500 LB4 found, sptsfix is on
/var/tuxbox/config/zapit/epgfilter.xml: No s
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
hda: rea
[frontend] uncommitted_switch_mode 0 auto_fec 0=134217729, sector=0
avia_gt_core: masking unhandled irq reg 0 bit 7
hda: read_intr: status=0x59 { DriveReady Seek
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
hda: read_intr: error=0x10 {
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
hda: read_intr: status=0x59 { D
rino)a_av_
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
mount: mounting /dev/ide
/liblcddisplay.so.0)un0/part2 on /hdd fa
starting /bin/neutrino
[neutrino] frameBuffer Instance created
rgument
avia_av_proc:
812k video memroc.c,v 1.15 2
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)0/target0/lun0/disc:
[neutrino] Softwar
avia_gt_core: autodetecting chip
[lcdd] month-skin not found -> using default...
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
avia_gt_core: masking unhandled irq reg 1 bit 11
[LCDFONT] Intializing font cache...
[neutrino] menue setup
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 11 providers
[CVideo::setVideoFormat] output format: 16:9
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
zap failed!
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
[sectionsd] getUTC: read: Connection timed out
für das grosse chaos habe ich meinen pc, den rest besorg ich selbst

hardware:
nokia avia500 mit IDE Sata Interface an Samsung LE46B650
AMD Phenom II X4 940BE auf Asrock A770DE
mit 3x Samsung Sata HDD 750GB,1x Esata HDD Samsung 250Gb
Windows 7 home premium

Antworten