Die vorgenannten Problem sind inzwischen gelöst - Verursacher war ein Hitzestau in der DBox.
Ich hab zufällig nach längerer Betriebszeit mal draufgefasst und war erschrocken, wie heiss sie geworden war.
Da ich diesen Hinweis im Zusammenhang mit inzwischen geloggten Hinweisen, wie lost-interrupt etc., gelesen hatte, hab ich mal nur den Deckel abgeschraubt, das Ide-Kabel etwas angehoben, Box ausgemacht und abkühlen lassen.
Im Betrieb mit geöffnetem Deckel treten nun keine lost-interrupts, keine Ruckler, kein ständiges Puffern und keine Aufnahmeabbrüche mehr auf, die Telnet-Geschwindigkeitstests liegen alle deutlich unter 30 Sekunden.
Noch vorhandene Ruckler und Fehlermeldungen bei Zugriff auf die jetzt vorhandene 750 GB Sata-Platte wurden mit Telnet und e2fsck behoben, da war einiges am Dateisystem korrupt.
Nachvollziehbar treten die Probleme nach einiger Zeit wieder auf, wenn der Deckel drauf ist.
Ok, mit offenem Deckel oder 1-2 nachgerüsteten Gehäuselüftern könnte ich leben.
Momentan gibts nur das Problem, dass sich die Box herunterfährt, wenn ich über das blaue Menü den TuxBox-Commander aufrufen möchte.
Das könnte aber durchaus eine meiner (Boot-) Einstellungen sein, ganz so sicher bin ich nicht, welche nun optimal sind..
Hier mal ein aktuelles Log dazu (nach dem Booten wurde eine Aufnahme gemacht, mal ein TS von jeder Platte abgespielt, dann der Tuxbox-Commander gestartet):
Code: Alles auswählen
ÿdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-29.2c.04.07.00.00-b0
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 172040
verify sig: 262
Branching to 0x40000
U-Boot 2009.06 (Tuxbox) (04. Jul 09 12:13:49)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670726 bytes loaded to 0x100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670662 Bytes = 654.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.2-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #3 Sa 4. Jul 12:
09:48 CEST 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:15:f0:0b
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.2 (2009-07-04 12:10:18 CEST)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
dboxide: $Id: main.c,v 1.14 2009/06/19 14:39:26 seife Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc394f000
dboxide: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray
dboxide: sreset succeeded
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Probing IDE interface ide0...
hda: HTS541060G9AT00, ATA DISK drive
hdb: ST3750630AS, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 117210240 sectors (60012 MB) w/7539KiB Cache, CHS=7296/255/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is on
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Thu Jan 1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.302 2009/06/27 19:47:19 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
hdb: 1465149168 sectors (750156 MB) w/16384KiB Cache, CHS=91201/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
/dev/ide/host0/bus0/target1/lun0: p1 p2
Adding Swap: 136544k swap-space (priority -1)
$Id: zapit.cpp,v 1.431 2009/06/28 21:56:14 seife Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
avia_gt_core: masking unhandled irq reg 0 bit 7
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
/dev/ide/host0/bus0/target0/lun0/disc:
setting 32-bit IO_support flag to 1
setting drive write-caching to 0 (off)
setting standby to 0 (off)
IO_support = 1 (32-bit)
write-caching = 0 (off)
insmod: a module named ext2 already exists
/dev/ide/host0/bus0/target1/lun0/disc:
setting 32-bit IO_support flag to 1
setting drive write-caching to 0 (off)
setting standby to 0 (off)
IO_support = 1 (32-bit)
write-caching = 0 (off)
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[camd] ca system id: 1722
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[CVideo::setVideoFormat] output format: 4:3(LB)
[neutrino] found esound, adding to mainmenue/personalize
imageinfo: JTG-Image [IDE] (2.3.3)
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[zapit] tuned frequency does not match request. difference: 6739
SPTS, queue 0 extended.
[neutrino] no file /var/tuxbox/config/init.end was found
avia_gt_core: masking unhandled irq reg 1 bit 15
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[CVideo::setVideoFormat] output format: 16:9
avia_av_wdt_thread: video decoding stopped ==> restart
[sectionsd] getUTC: read: Connection timed out
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
12:00:45.656 [timeThread] - 23.07.2009 14:00:13, tim: Thu Jul 23 14:00:13 2009
12:00:45.711 [timeThread] Time set via DVB, going to sleep for 1800 seconds.
[neutrino] no file /var/tuxbox/config/recording.start was found
no response from sectionsd
Record channel_id: 44da4016dca epg: 0, apids 0x0 mode 1
[stream2file]: ringbuffersize 2097152
[stream2file] allocated ringbuffer size: 2097151
no response from sectionsd
[stream2file] filename: '/hdd/2009-07-23_140013.001.ts'
myfilename: '/hdd/2009-07-23_140013'
[timerd] timer_wakeup = false; a.time: 0 now: 1248350458
[timerd] not scheduling shutdown event
Stop
record time: 44
[mi] saveXml: /hdd/2009-07-23_140013.xml
saveFile:1074 saving TS movieinfo: 2009-07-23_140013.xml
[stream2file]: pthreads exit code: 1, dir: '/hdd', filename: '2009-07-23_140013'
myfilename: '/hdd'
[neutrino] no file /var/tuxbox/config/recording.end was found
14:01:00.668 dmxSDT: going to sleep...
14:01:01.465 eit_set_update_filter, servicekey = 0x44da4016dca, current version
7
[movieplayer.cpp] actionKey=tsplayback
[movieplayer.cpp] executing /var/tuxbox/config/movieplayer.start.
sh: /var/tuxbox/config/movieplayer.start: not found
Datei /var/tuxbox/config/movieplayer.start fehlt. Bitte erstellen, wenn gebrauch
t.
File /var/tuxbox/config/movieplayer.start not found. Please create if needed.
: Success
[mp] setting parental to (0)
sh: /var/bin/parental.sh: not found
[mp] Startplay
[mp] PlayFileThread starts
[mp] found pida[0]: 0x0078, ac3=0
[mp] plain TS file with vpid=(0x006E) apid=(0x0078) ac3=(0)
[mp] buffer (1633344 bytes) created, using (24) total segments, opt = (18)
[mp] reader thread started ...
[mp] buffering ...
[mp] entering player loop
SPTS, queue 0 extended.
avia_av_wdt_thread: video decoding stopped ==> restart
[mp] buffering ...
[mp] jump to pos (39675144) of total (82789184)
SPTS, queue 0 extended.
avia_av_wdt_thread: video decoding stopped ==> restart
[mp] ... reader thread terminated
[mp] leaving player loop ...
[mp] ... checking for another playlist item
[mp] mp_playFileThread terminated
[mp] Startplay
[mp] PlayFileThread starts
[mp] plain TS file with vpid=(0x0066) apid=(0x0078) ac3=(0)
[mp] buffer (1633344 bytes) created, using (24) total segments, opt = (18)
[mp] reader thread started ...
[mp] buffering ...
[mp] entering player loop
SPTS, queue 0 extended.
[mp] ... reader thread terminated
[mp] leaving player loop ...
[mp] ... checking for another playlist item
[mp] mp_playFileThread terminated
[mp] Startplay
[mp] PlayFileThread starts
[mp] found pida[0]: 0x0066, ac3=0
[mp] plain TS file with vpid=(0x0065) apid=(0x0066) ac3=(0)
[mp] buffer (1633344 bytes) created, using (24) total segments, opt = (18)
[mp] reader thread started ...
[mp] buffering ...
[mp] entering player loop
SPTS, queue 0 extended.
[mp] buffering ...
[mp] jump to pos (39062640) of total (67474892)
SPTS, queue 0 extended.
avia_av_wdt_thread: video decoding stopped ==> restart
[mp] ... reader thread terminated
[mp] leaving player loop ...
[mp] ... checking for another playlist item
[mp] mp_playFileThread terminated
[frontend] uncommitted_switch_mode 0 auto_fec 0
SPTS, queue 0 extended.
[movieplayer.cpp] executing /var/tuxbox/config/movieplayer.end.
sh: /var/tuxbox/config/movieplayer.end: not found
Datei /var/tuxbox/config/movieplayer.end fehlt. Bitte erstellen, wenn gebraucht.
File /var/tuxbox/config/movieplayer.end not found. Please create if needed.
: No such file or directory
14:03:08.840 eit_set_update_filter, servicekey = 0x44da4016dca, current version
7
14:03:17.969 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f
ilter 0x50 mask 0xf0
SPTS, queue 0 extended.
14:03:25.053 eit_set_update_filter, servicekey = 0x43700016d66, current version
17
< --> Menue blaue Taste -> TuxboxCommander>
[CPlugins] (id,val):(end_y,555)
[CPlugins] (id,val):(end_x,687)
[CPlugins] (id,val):(off_y,23)
[CPlugins] (id,val):(off_x,27)
[CPlugins] (id,val):(video_format,0)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,17)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
Tuxbox Commander Version 1.16TuxCom <Font "/share/fonts/pakenham.ttf" loaded>
tuxcom: reading settings
*** glibc detected *** malloc(): memory corruption: 0x102df728 ***
Aborted
zapit shot down :)
Waiting for timerd (max. 5 seconds)
Waiting for timerd (max. 4 seconds)
Waiting for timerd (max. 3 seconds)
Waiting for timerd (max. 2 seconds)
Waiting for timerd (max. 1 seconds)
Going to halt system now ...
starting pid 229, tty '': '/etc/init.d/halt'
CXA2092 found
CXA2092 found
Unmounting 'ext2' on '/mnt/slave'
Unmounting 'ext2' on '/hdd'
Unmounting 'tmpfs' on '/tmp'
umount: can't umount /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
The system is going down NOW!
Sent SIGTERM to all processes
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sent SIGKILL to all processes
Requesting system halt
flushing ide devicesú
und hier noch ein älteres Log vom "überhitzten" Zustand mit geschlossenem Deckel:
Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-29.2c.04.07.00.00-b0
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 172040
verify sig: 262
Branching to 0x40000
U-Boot 2009.06 (Tuxbox) (04. Jul 09 12:13:49)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
env: found lcd_bias with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670726 bytes loaded to 0x100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670662 Bytes = 654.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.2-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #3 Sa 4. Jul 12:
09:48 CEST 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:15:f0:0b
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.2 (2009-07-04 12:10:18 CEST)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
[timerd] timer_wakeup = false; a.time: 0 now: 1248346246
Stop
[timerd] not scheduling shutdown event
record time: 115
[mi] saveXml: /hdd/2009-07-23_124850.xml
saveFile:1074 saving TS movieinfo: 2009-07-23_124850.xml
[neutrino] no file /var/tuxbox/config/recording.end was found
[stream2file]: pthreads exit code: 1, dir: '/hdd', filename: '2009-07-23_124850'
myfilename: '/hdd'
12:50:46.811 eit_set_update_filter, servicekey = 0x44da4016dca, current version
3
SPTS, queue 0 extended.
12:51:00.257 eit_set_update_filter, servicekey = 0x43700016d66, current version
11
[neutrino] no file /var/tuxbox/config/recording.start was found
Record channel_id: 43700016d66 epg: 43700016d665ea0, apids 0x0 mode 1
fsk:0, Genre:32, Dauer: 45
[stream2file]: ringbuffersize 2097152
[stream2file] allocated ringbuffer size: 2097151
[stream2file] filename: '/hdd/2009-07-23_125110.001.ts'
myfilename: '/hdd/2009-07-23_125110'
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 246024
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 249960
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
avia_gt_dmx: queue 0 overflow (count: 3)
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 249968
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
avia_gt_dmx: queue 0 overflow (count: 2)
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 249976
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
avia_gt_dmx: queue 0 overflow (count: 2)
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 249984
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
avia_gt_dmx: queue 0 overflow (count: 3)
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 249992
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
avia_gt_dmx: queue 0 overflow (count: 3)
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 250000
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
avia_gt_dmx: queue 0 overflow (count: 3)
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 250008
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
avia_gt_dmx: queue 0 overflow (count: 2)
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
PANIC: not enough space in ringbuffer, available 52839, needed 83273
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 250016
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
avia_gt_dmx: queue 0 overflow (count: 2)
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
hda: status timeout: status=0xd0 { Busy }
end_request: I/O error, dev 03:02 (hda), sector 250024
hda: no DRQ after issuing WRITE
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Ich hoffe, damit könnt Ihr was anfangen, wenn noch weitere Logs nötig sind, fertige ich die gerne an.
Gruß
Mike