Das Aufnahmeverzeichnis ist nicht beschreibbar.....

[heldgop]

hi,

habe das neuste jtg image aufgespielt und die hdd mit xfs formatiert, allerdings kann ich nichts aufnahmen, kommt immer die meldung im threadtitel.

das spuckt der bootmaneger aus:

[neutrino] no file /var/tuxbox/config/recording.start was found
Record channel_id: 110085000d epg: 110085000d5aac, apids 0x0 mode 1
fsk:0, Genre:144, Dauer: 50
[CFileDevice] stream2file error code: -2
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable


jetzt frage ich mich weshalb die datei recording.star nicht vorhanden ist?

könnte mir jemand die datei zukommen lassen? vllt reicht es wenn ich die einfach einspiele. fabian@heldhome.de


MfG

[Jeppdot]

Hallo,

ist die Festplatte den richtig gemountet und ist unter den Aufnahmeeinstellung der Standardaufnahmepfad korrekt gesetzt?

Kannst du von Hand eine Datei auf der Festplatte erstellen?

Gruß

[heldgop]

hi,

ich habe unter den aufnahmeeinstellungen die hdd ausgewählt, also den pfad der hdd.

per ftp kann ich auch nichts auf die hdd schieben.

muss man denn noch irgendwelche sachen einstellen? habe nur die hdd formatiert und im direktaufnahme menue die hdd ausgewählt.

bei dem ersten jtg hdd image ging das alles von alleine

MfG

[Jeppdot]

Hmm,

wohin lässt du schreiben?

/mnt/hdd oder /hdd

Schau dir mal in yWeb die Mountpunkte an. Ist die hdd überhaupt dabei?

Gruß

[jmittelst]

Ohne vollständiges Log wird das nix.

cu
Jens

[heldgop]

hab mal ein komplettes bootlog gemacht:


_______________________________

Requesting system reboot
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-78.23.bb.07.00.00-cd
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 162700
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (May 6 2007 - 21:31:13)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 694160 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 694096 Bytes = 677.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34.4-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #2 So 6. Mai 21
:39:42 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:25:f0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.5.1 (2007-05-21 22:19:40 CEST) multi-call binary
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: SAMSUNG SP2514N, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan 1 12:00:00 CET 1970
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
SGI XFS with no debug enabled
Adding Swap: 136544k swap-space (priority -1)
attempt to access beyond end of device
03:02: rw=0, want=244059456, limit=243714082
I/O error in filesystem ("ide0(3,2)") meta-data dev ide0(3,2) block 0x1d181a7f
("xfs_read_buf") error 5 buf count 512
XFS: size check 2 failed
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed

/dev/ide/host0/bus0/target0/lun0/disc:
setting drive write-caching to 0 (off)
setting standby to 50 (4 minutes + 10 seconds)

/dev/ide/host0/bus0/target0/lun0/disc:
setting drive write-caching to 0 (off)
setting standby to 50 (4 minutes + 10 seconds)
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1993
DVB: registering frontend 0:0 (VES1993)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.238 2007/05/23 16:39:55 papst Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
$Id: zapit.cpp,v 1.396 2007/05/13 20:14:40 houdini Exp $
[frontend] uncommitted_switch_mode 0
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 43E onid 1
[getservices] dup transponder id 438 onid 1
[getservices] dup transponder id 442 onid 1
[getservices] dup transponder id 412 onid 1
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 43 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[sectionsd] getUTC: read: Connection timed out
____________________________________________________


da steht irgendwas von error in filesystem, hoffe die hdd is net kaputt


ich werde die hdd mal im ext3 formatieren, vllt bringt das ja was.


mfg

[jmittelst]

Zumindest konnte die Partition nicht mehr gemountet werden.
Das mit dem Filesystem-Crash ist aber wohl bei manchen Boxen und/oder Platten ein Dauerthema, s.a. http://forum.tuxbox.org/forum/viewtopic.php?t=45371

cu
Jens

[heldgop]

nach dem formatieren ging die platte ja nie, kan doch net sein das nach jedem formatieren das filsystem ne crasht.

ich will endlich wieder aufnehmen

jemand noch ne idee was ich machen kann?

mfg

[Charles Darwin]

...steht da nicht alles?

Code: Alles auswählen

Adding Swap: 136544k swap-space (priority -1)
attempt to access beyond end of device
03:02: rw=0, want=244059456, limit=243714082
I/O error in filesystem ("ide0(3,2)") meta-data dev ide0(3,2) block 0x1d181a7f
("xfs_read_buf") error 5 buf count 512
XFS: size check 2 failed 

Nicht, dass ich wüßte warum du diese Fehlermeldung bekommst...
Hast du deine Filmpartition wirklich auf 244Gbyte gesetzt??? Würde die Platte mal in kleinere Partitionen aufteilen...eine für Swap, eine für Film und eine für mp3.

...und wenn du den writecache auf off hast...kannste auch gleich ext2 verwenden...

versuch doch die Platte über das HDD-Menü mit den obigen Einstellungen nochmal zu initialisieren...

[heldgop]

soooo,

hab jetzt mal nur mit 200gb formatiert, bringt allerdings auch nichts

log:



debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-78.23.bb.07.00.00-cd
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 162700
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (May 6 2007 - 21:31:13)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 694160 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 694096 Bytes = 677.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34.4-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #2 So 6. Mai 21
:39:42 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:25:f0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.5.1 (2007-05-21 22:19:40 CEST) multi-call binary
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38aa000
Probing IDE interface ide0...
hda: SAMSUNG SP2514N, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
Thu Jan 1 12:00:00 CET 1970
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
SGI XFS with no debug enabled
Adding Swap: 136544k swap-space (priority -1)
XFS mounting filesystem ide0(3,2)
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

/dev/ide/host0/bus0/target0/lun0/disc:
setting drive write-caching to 1 (on)
setting standby to 50 (4 minutes + 10 seconds)

/dev/ide/host0/bus0/target0/lun0/disc:
setting drive write-caching to 1 (on)
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
setting standby to 50 (4 minutes + 10 seconds)
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1993
DVB: registering frontend 0:0 (VES1993)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.238 2007/05/23 16:39:55 papst Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
$Id: zapit.cpp,v 1.396 2007/05/13 20:14:40 houdini Exp $
[frontend] uncommitted_switch_mode 0
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 43E onid 1
[getservices] dup transponder id 438 onid 1
[getservices] dup transponder id 442 onid 1
[getservices] dup transponder id 412 onid 1
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 43 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
[timeThread] - 29.05.2007 12:39:58, tim: Tue May 29 12:39:58 2007
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)

[DrStoned]

Lass mal das Log weiterlaufen und formatiere nochmal, damit man sieht, was während der Formatierung passiert. Probiere auch mal ein eine Aufnahme, und lasse auch hier das Log mitlaufen. Versuche auch mal mit dem Tuxbox-Commander-Plugin (blaue Taste) irgendeine Datei aus dem Boxverzeichnis, nach /hdd zu kopieren.

Jetzt frage ich mich, weshalb die Datei recording.start nicht vorhanden ist?

könnte mir jemand die Datei zukommen lassen? vllt reicht es wenn ich die einfach einspiele

Die Recording-Skripts kannst Du hier herunterladen. Wenn Du die Fernbedienung während der Aufnahme nicht sperren willst, die entsprechenden Zeilen in recording.start und recording.end mit einer # auskommentieren, wie in der Anleitung beschrieben. Und nicht vergessen für die Skripte Ausführrechte (755) zu vergeben.

[heldgop]

hier mal das log wärend dem formatieren:

[neutrino ide] executing /var/tuxbox/config/formating.start
[: missing ]
[neutrino ide] found mountpoint /hdd
[neutrino ide] unmount /hdd
[neutrino ide] swapoff successful
/dev/ide/host0/bus0/target0/lun0: p1 p2

Disk /dev/ide/host0/bus0/target0/lun0/disc: 30401 cylinders, 255 heads, 63 secto
rs/track
Old situation:
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End #cyls #blocks Id System
/dev/ide/host0/bus0/target0/lun0/part1 0+ 16 17- 136552 8
2 Linux swap / Solaris
/dev/ide/host0/bus0/target0/lun0/part2 17 25513 25497 204804652+ 8
3 Linux
/dev/ide/host0/bus0/target0/lun0/part3 0 - 0 0
0 Empty
/dev/ide/host0/bus0/target0/lun0/part4 0 - 0 0
0 Empty
New situation:
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End #cyls #blocks Id System
/dev/ide/host0/bus0/target0/lun0/part1 0+ 16 17- 136552 8
2 Linux swap / Solaris
/dev/ide/host0/bus0/target0/lun0/part2 17 25513 25497 204804652+ 8
3 Linux
/dev/ide/host0/bus0/target0/lun0/part3 0 - 0 0
0 Empty
/dev/ide/host0/bus0/target0/lun0/part4 0 - 0 0
0 Empty
Successfully wrote the new partition table

Re-reading the partition table ...
/dev/ide/host0/bus0/target0/lun0: p1 p2

[neutrino ide] sfdisk completed successful
Setting up swapspace version 1, size = 139825152 bytes
[neutrino ide] mkswap completed successful
[neutrino ide] part2 make filesystem completed successful
[neutrino ide] executing /var/tuxbox/config/formating.end
Adding Swap: 136544k swap-space (priority -2)
XFS mounting filesystem ide0(3,2)

hier vom HDD.Check:

[neutrino ide] found mountpoint /hdd
[neutrino ide] unmount /hdd
[neutrino ide] executing /var/tuxbox/config/hddcheck.start
[: missing ]
- creating 2 worker thread(s)
Phase 1 - find and verify superblock...
- reporting progress in intervals of 15 minutes
Phase 2 - using internal log
- zero log...
zero_log: head block 4 tail block 4
- scan filesystem freespace and inode maps...
- 15:41:58: scanning filesystem freespace - 16 of 16 allocation groups d
one
- found root inode chunk
Phase 3 - for each AG...
- scan and clear agi unlinked lists...
- 15:41:58: scanning agi unlinked lists - 16 of 16 allocation groups don
e
- process known inodes and perform inode discovery...
- agno = 0
- agno = 1
- agno = 3
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 8
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 13
- agno = 14
- agno = 15
- agno = 2
- 15:41:59: process known inodes and inode discovery - 64 of 64 inodes d
one
- process newly discovered inodes...
- 15:41:59: process newly discovered inodes - 16 of 16 allocation groups
done
Phase 4 - check for duplicate blocks...
- setting up duplicate extent list...
- clear lost+found (if it exists) ...
- 15:42:15: setting up duplicate extent list - 16 of 16 allocation group
s done
- check for inodes claiming duplicate blocks...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 13
- agno = 14
- agno = 15
- agno = 8
- 15:42:26: check for inodes claiming duplicate blocks - 64 of 64 inodes
done
Phase 5 - rebuild AG headers and trees...
- agno = 1
- agno = 0
- agno = 2
- agno = 3
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 8
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 13
- agno = 14
- agno = 15
- 15:43:14: rebuild AG headers and trees - 16 of 16 allocation groups do
ne
- reset superblock...
Phase 6 - check inode connectivity...
- resetting contents of realtime bitmap and summary inodes
- ensuring existence of lost+found directory
- traversing filesystem starting at / ...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 8
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 13
- agno = 14
- agno = 15
- 15:43:16: traversing filesystem - 16 of 16 allocation groups done
- traversal finished ...
- traversing all unattached subtrees ...
- traversals finished ...
- moving disconnected inodes to lost+found ...
Phase 7 - verify and correct link counts...
- agno = 0
- agno = 1
- agno = 2
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 8
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 3
- agno = 14
- agno = 15
- agno = 13
- 15:43:18: verify and correct link counts - 64 of 64 inodes done

XFS_REPAIR Summary Tue May 29 15:43:20 2007

Phase Start End Duration
Phase 1: 05/29 15:41:21 05/29 15:41:21
Phase 2: 05/29 15:41:21 05/29 15:41:58 37 seconds
Phase 3: 05/29 15:41:58 05/29 15:41:59 1 second
Phase 4: 05/29 15:41:59 05/29 15:42:27 28 seconds
Phase 5: 05/29 15:42:27 05/29 15:43:14 47 seconds
Phase 6: 05/29 15:43:14 05/29 15:43:17 3 seconds
Phase 7: 05/29 15:43:17 05/29 15:43:18 1 second

Total run time: 1 minute, 57 seconds
done
[neutrino ide] executing /var/tuxbox/config/hddcheck.end
swapon: /dev/ide/host0/bus0/target0/lun0/part1: Device or resource busy
XFS mounting filesystem ide0(3,2)

msgbox Message-Box Version 1.62

die meldung die am schluss kommt ist leer, steht nur:
Ergebniss HDD-Check by
OK




das kommt wenn ich über blau rot die aufnahme starten will:

[neutrino] no file /var/tuxbox/config/recording.start was found
Record channel_id: 4530001445e epg: 4530001445ee5b4, apids 0x0 mode 1
SPTS, queue 0 extended.
fsk:0, Genre:0, Dauer: 29
[CFileDevice] stream2file error code: -2
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable

und das wenn ich per ftp was auf de hdd schieben will:

hmmmmm, jetzt kann ich aufeinmal was auf die hdd schieben und auch per bildbetrachter anschauen. ich werd net schlau aus dem ding......


danke für eure hilfe

[DrStoned]

die meldung die am schluss kommt ist leer, steht nur:
Ergebniss HDD-Check by
OK

Das kommt daher, dass xfs_repair seine Meldungen nicht in eine Log-Datei umleiten kann. Zumindest haben wir bis jetzt noch nicht rausgekriegt, wie man das bewerkstelligen könnte.
Mit fsck.ext2 und fsck.ext3 funktionieren die Umleitungen der Meldungen in eine Logdatei
Am Besten testest Du jetzt noch mal eine Aufnahme mit den Recording-Skripts.
Mittlerweile hat sich im Tuxbox-Forum herausgestellt, dass gerade die großen Samsung-Platten Ärger machen, weil sie eine immens lange Zeit zum Hochlauf benötigen. Gorcon hat da die gleichen Probleme. Da könnten die Rekording-Skripts Abhilfe schaffen.

Und nicht vergessen das Aufnahmeverzeichnis richtig einzustellen.

[heldgop]

werd ich heute abend mal testen.

allerdings wundert es mich das ich mit der gleichen hdd und dem alten jtg image (das "erste" hdd) lange zeit ohne probleme aufgenommen habe.

das samsung paltten nicht so toll sein sollen für die box hab ich schon gelesen. allerdings im zusammenhang mit filesystem crashs...

mfg

[DrStoned]

die meldung die am schluss kommt ist leer, steht nur:
Ergebniss HDD-Check by
OK

Das ist jetzt durch den neuen Testsnap behoben. Die Logdatei wird beim HDD-Check jetzt auch unter XFS erstellt nach /tmp/fsck.log.