Abbruch beim Schreiben auf Festplatte

Alles - außer Verbesserungsvorschläge - zu JtG hier rein.
Antworten
Nachricht
Autor
Infusion
Einmal-Streamer
Einmal-Streamer
Beiträge: 2
Registriert: Mi 12 Mai 2010, 21:31

Abbruch beim Schreiben auf Festplatte

#1 Beitrag von Infusion » So 06 Jun 2010, 12:39

Moin Moin,hab ein Problem und bekomm es nicht gebacken. Hab ein Hallenberg IDE-SATA-Interface mit ner 250GB WD Platte. Soweit wird alles erkannt und auch richtig angezeigt. Nur wenn ich irgend etwas aufnehmen will kommt nach ner Weile ne Abbruchmeldung,das die daten nicht schnell genug geschrieben werden konnten.Hab mal ein Bootlog erstellt,vielleicht weiss einer nen Rat.

Code: Alles auswählen

startet at 06.06.2010 13:24:06
------------------------------
OOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 170380
verify sig: 262
Branching to 0x40000
U-Boot 2009.08 (Tuxbox) (04.12.09 09:04:31) 
CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS:   .  | / - \ |  done.
env: found console with value ttyS0
env: found baudrate with value 9600
env: found dbox_duplex with value 0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
LCD:   ready
Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  1  0 
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 671124 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
   Image Name:   Linux-2.4.37.7-dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    671060 Bytes = 655.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.37.7-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #1 Fr 4. Dez 08:42:33 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1c:0c:4d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.15.2 (2009-12-04 09:15:43 CET)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
dboxide: $Id: main.c,v 1.14 2009/06/19 14:39:26 seife Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc394f000
dboxide: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray
dboxide: sreset succeeded
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Probing IDE interface ide0...
hda: WDC WD2500BEVT-22ZCT0, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2
Journalled Block Device driver loaded
avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 500 LB4 found, sptsfix is on
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
Adding Swap: 104380k swap-space (priority -1)
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
/dev/ide/host0/bus0/target0/lun0/disc:
 setting 32-bit IO_support flag to 1
 setting drive write-caching to 1 (on)
 setting standby to 251 (5 hours + 30 minutes)
 IO_support    =  1 (32-bit)
 write-caching =  1 (on)
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Fri Dec 13 21:45:52 CET 1901
$Id: sectionsd.cpp,v 1.315 2009/11/30 21:50:26 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.450 2009/11/26 20:58:21 rhabarber1848 Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[camd] ca system id: 1722
[CVideo::setVideoFormat] output format: 4:3(LB)
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) 
[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 11 providers
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
21:46:13.888 [camd] set emm caid 1722 capid 1500
[timeThread] - 06.06.2010 13:25:24, tim: Sun Jun  6 13:25:24 2010
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 000a
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
21:46:14.177 [camd] set emm caid 1722 capid 1500
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
[neutrino] timeset event. difference is -871660146 s, stepping...
13:25:24.291 dmxSDT: going to sleep...
descramble onid: 0001 sid: 000a status: 1d1d
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
13:25:24.597 eit_set_update_filter, servicekey = 0x20085000a, current version 12
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[CVideo::setVideoFormat] output format: 16:9
[timerd] using config file /var/tuxbox/config/timerd.conf
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
[neutrino] no file /var/tuxbox/config/recording.start was found
Record channel_id: 20085000a epg: 20085000a14f5, apids 0x0 mode 1
fsk:16, Genre:16, Dauer: 110
[stream2file]: ringbuffersize 4194304 write_ts 1 numpids 4
[stream2file] allocated ringbuffer size: 4194303
[stream2file] filename: '/hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550.001.ts'
            myfilename: '/hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550'
13:25:54.701 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
[timerd] using config file /var/tuxbox/config/timerd.conf
13:26:02.252 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:09.894 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:17.502 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:25.529 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:36.152 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:47.802 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
[sectionsd] DMX::readNbytes read: Value too large for defined data type
13:27:10.096 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
PANIC: not enough space in ringbuffer, available 3031, needed 133081
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
PCR discontinuity: PCR: 0x01D49F2E5, OLDPCR: 0x01D49595E, Diff: 39303
ide0: reset: success
avia_gt_dmx: queue 0 overflow (count: 2)
avia_gt_dmx: queue 4 overflow (count: 1)
avia_gt_dmx: queue 4 overflow (count: 1)
[stream2file]: pthreads exit code: -1, dir: '/hdd', filename: 'Sky_Cinema_Cadillac_Records_2010-06-06_132550' myfilename: '/hdd'
[neutrino] no file /var/tuxbox/config/recording.start was found
Record channel_id: 20085000a epg: 0, apids 0x0 mode 1
13:27:42.076 dmxSDT: going to sleep...
no response from sectionsd
no response from sectionsd
[stream2file] INFO: /hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550.xml already exists, not overwriting
[stream2file]: ringbuffersize 4194304 write_ts 1 numpids 4
[stream2file] allocated ringbuffer size: 4194303
[stream2file] filename: '/hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550.001.ts'
            myfilename: '/hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550'
[stream2file] /hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550.001.ts exists, retrying...
[stream2file] filename: '/hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550.002.ts'
            myfilename: '/hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550'
[timerd] timer_wakeup = false; a.time: 0 now: 1275823673
[timerd] not scheduling shutdown event
Stop
record time: 122 
[mi] saveXml: /hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550.xml
saveFile:1085 saving TS movieinfo: Sky_Cinema_Cadillac_Records_2010-06-06_132550.xml
[neutrino] no file /var/tuxbox/config/recording.end was found
[stream2file]: pthreads exit code: 1, dir: '/hdd', filename: 'Sky_Cinema_Cadillac_Records_2010-06-06_132550' myfilename: '/hdd'
[timerd] using config file /var/tuxbox/config/timerd.conf
------------------------------
stopped at 06.06.2010 13:28:08

Riker
TuxBox CDK Experte
TuxBox CDK Experte
Beiträge: 1466
Registriert: Mo 04 Aug 2003, 16:22
Wohnort: Hallenberg.com
Kontaktdaten:

Re: Abbruch beim Schreiben auf Festplatte

#2 Beitrag von Riker » So 06 Jun 2010, 14:20

hda: lost interrupt

- Kabel vom Interface zum Modem niocht okay
- CPU defekt der Box
- Kontaktprobleme am Sockel

Gruß Riker
1. Nokia Sat 2xI Avia 600 7-farbiges Display, IDE 120GB HDD 2,5"
2. Dreambox DM8000-HD an 46" Full-HD Samsung LED-TV
3. Diverese d-Boxen und Dreamboxen im Schrank
4. habe fertig

Benutzeravatar
jmittelst
Co-Admin
Co-Admin
Beiträge: 11013
Registriert: So 16 Nov 2003, 13:42
Wohnort: Schildgen (Bergisch Gladbach)
Kontaktdaten:

Re: Abbruch beim Schreiben auf Festplatte

#3 Beitrag von jmittelst » So 06 Jun 2010, 15:47

kjournald starting. Commit interval 5 seconds
EXT3-fs warning: checktime reached, running e2fsck is recommended
ext3 ist nicht performant genug für eine Aufnahme.
[stream2file]: ringbuffersize 4194304 write_ts 1 numpids 4
[stream2file] allocated ringbuffer size: 4194303
[stream2file] filename: '/hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550.001.ts'
myfilename: '/hdd/Sky_Cinema_Cadillac_Records_2010-06-06_132550'
13:25:54.701 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
[timerd] using config file /var/tuxbox/config/timerd.conf
13:26:02.252 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:09.894 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:17.502 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:25.529 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:36.152 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
13:26:47.802 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
[sectionsd] DMX::readNbytes read: Value too large for defined data type
13:27:10.096 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[3] filter 0x60 mask 0xf1
PANIC: not enough space in ringbuffer, available 3031, needed 133081
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
PCR discontinuity: PCR: 0x01D49F2E5, OLDPCR: 0x01D49595E, Diff: 39303
ide0: reset: success
Der "lost interrupt" taucht erst auf, als der Puffer voll ist, anschließend, nach dem Reset nicht mehr. Könnte mir vorstellen, dass das Problem eher aus der Richtung kommt. Ich würde zumindest erstmal das Filesstem wechseln und schon beim formatieren mal auf das Log achten. Tauchen dann immer noch "lost interrupt"-Fehler auf, würde ich bei der Hardware weiter machen.

cu
Jens
VU+ Ultimo 4k
VU+ Duo²
VU+ Solo²


[Zitat]Es gibt 2 Dinge, die unendlich sind. Das Weltall und die Dummheit der Menschen. Beim Weltall bin ich mir aber nicht so sicher...[/Zitat]
Vorsicht! Lesen kann zu Bildung führen! Links, Suchfunktion, Wikis und Google deshalb nur mit Bedacht nutzen!

Benutzeravatar
DrStoned
Moderator
Moderator
Beiträge: 2604
Registriert: Mo 15 Sep 2003, 22:57
Wohnort: Reutlingen
Kontaktdaten:

Re: Abbruch beim Schreiben auf Festplatte

#4 Beitrag von DrStoned » So 06 Jun 2010, 15:53

EXT3 benötigt viel zu viel Rechenzeit. Um von EXT3 auf EXT2 umzusteigen, brauchst Du nicht zu formatieren. Es genügt einfach das Dateisystem zu wechseln und nicht zu formatieren und dann die Box neu starten.
Greetz von DrStoned :lol: :lol: :lol:

1. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0 mit 64 MB Onbord-RAM, 100 GB Wechsel-Festplatte, 1GB-CF-Karte, USB-Interface, blaues Display
2. Box: Nokia Avia 500 2x Intel SAT Bmon 1.0
3. Box: Nokia Avia 500 2x AMD Kabel Bmon 1.0
4. Box: Dreambox 7025+ 2 SAT-Tuner mit 250 MB Festplatte, 2 GB CF-Karte
Image: Immer aktuelles JtG-Image, mit aktuellem Snapshot
Hardware: StreamPC: ASUS-A7V-133 Athlon 900, 256MB RAM, NIC 3COM 3C905C-TX 40 GB + 160 GB + 400 GB Festplatte, DVD-Brenner: LG-4160B
Arbeits-PC: MSI-KT3 Ultra Athlon 2800XP 512MB RAM, DVD-Brenner: Toshiba SD-R5112,
DVD-Player: APEX AD703, Daewoo 5000N
Software: SFU 3.5, ProjectX, Cuttermaran, Nero 6.0.0.19, VLC 0.72

Infusion
Einmal-Streamer
Einmal-Streamer
Beiträge: 2
Registriert: Mi 12 Mai 2010, 21:31

Re: Abbruch beim Schreiben auf Festplatte

#5 Beitrag von Infusion » So 06 Jun 2010, 18:39

Danke ersteinmal für die Tips,werd mich denn mal drüber machen,um zu schauen woran es liegen könnete bzw. einen log vom formatieren erstellen

Antworten